Edelbrock part #7111 Performer RPM Oldsmobile 350 intake manifold is designed for 330-350-403 c.i.d. Oldsmobile's and 1980-1/2 to 1985 307 c.i.d. engines with 5A heads (casting #3317). This Oldsmobile manifold is a high-rise, dual-plane design with 180-degree firing order engineered for maximum top-end horsepower while maintaining throttle response. Port flange has extra material above the runner for use with cast iron 455 heads and Edelbrock Performer RPM heads #60519. Has clearance for HEI distributor. Carb pad accepts square-bore carbs without adapters.
Specifications:
| Description_ABR |
Intake Mnfld |
| Description_ASM |
Oldsmobile:Small-Block:330 (5.4L)/350 (5.7L)/403 (6.6L) |
| Description_DEF |
Engine Intake Manifold |
| Description_EXT |
Edelbrock Performer Olds 350 Intake Manifold for Oldsmobile 330-403 Small-Block V8 |
| Description_INV |
RPM Oldsmobile 307-403 Intake Manifold |
| Description_MKT |
Edelbrock part #7111 Performer RPM Oldsmobile 350 intake manifold is designed for 330-350-403 c.i.d. Oldsmobile's and 1980-1/2 to 1985 307 c.i.d. engines with 5A heads (casting #3317). This Oldsmobile manifold is a high-rise, dual-plane design with 180-degree firing order engineered for maximum top-end horsepower while maintaining throttle response. Port flange has extra material above the runner for use with cast iron 455 heads and Edelbrock Performer RPM heads #60519. Has clearance for HEI distributor. Carb pad accepts square-bore carbs without adapters. |
| Description_LAB |
Performer Small Block Oldsmobile 350 Intake Manifold |
| Description_TRA |
Recommended intake gasket: Fel-Pro #MS96027 |
| Description_TRA |
No provision for OEM choke |
| Description_TRA |
Will not clear hood on 403 Olds, Firebird/TA. OEM carb requires conversion to electric/manual choke |
| Description_TRA |
Manifold height: 2" taller than stock A-4.80", B-5.80 |
| Description_TRA |
Carb pad height: 5.30" |
| Description_TRA |
Carb recommendations: Edelbrock AVS2 or Performer Series 650-800 cfm. |
| Description_TRA |
Port exit dimensions: 1.22" x 1.86" |
| Description_TRA |
Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA |
Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| Material |
Aluminum |
| Finish |
Satin |
| CNC Ported |
No |
| EGR Port |
No |
| Flange Type |
4150 |
| Single Or Dual Plane Type |
Dual |
| Series |
Performer RPM |
| Rear Maximum Height |
5.800 |
| Gasket Or Seal Included |
No |
| Front Maximum Height |
4.800 |
| Grade Type |
Performance |
| Basic Operating RPM Range |
1500-6500 |
| RGL |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Center Maximum Height |
5.300 |
| Vehicle Model |
Oldsmobile |
| Length |
8.0000 |
| Width |
15.0000 |
| Height |
24.0000 |
| Weight |
26.0000 |
