Edelbrock part #5419 C-357-B Triple-Deuce intake manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys, this manifold has a balanced 180-degree firing order port runner arrangement. It contains an exhaust gas heat crossover and offers excellent performance potential. This intake manifold has machined front oil filler tube pad with boss and is machined for 4-bolt carburetors. Carb center-to-center: 5-1/2". Use with Performer-Plus camshaft and lifter kit #2103 for low-end torque or Torker-Plus cam/kit #5002 for top-end power.
Specifications:
| Description_ABR |
Intake Mnfld |
| Description_ASM |
Chevrolet:Small-Block Gen I:302 (4.9L)/327 (5.4L)/350 (5.7L)/400 (6.6L) |
| Description_DEF |
Engine Intake Manifold |
| Description_EXT |
Edelbrock C-357-B Triple-Deuce Intake Manifold For 4-Bolt Carbs For Chevrolet 262-400 Small-Block V8 with1955-1986 Cast Iron Cylinder Heads |
| Description_MKT |
Edelbrock part #5419 C-357-B Triple-Deuce intake manifold is designed for 1955-86 262-400 c.i.d. small-block Chevys, this manifold has a balanced 180-degree firing order port runner arrangement. It contains an exhaust gas heat crossover and offers excellent performance potential. This intake manifold has machined front oil filler tube pad with boss and is machined for 4-bolt carburetors. Carb center-to-center: 5-1/2". Use with Performer-Plus camshaft and lifter kit #2103 for low-end torque or Torker-Plus cam/kit #5002 for top-end power. |
| Description_LAB |
Edelbrock C-357-B Triple-Deuce Manifold for S/B Chevy 4-Bolt Carb Pattern |
| Description_INV |
Performer C-357B 3x2 Intake Manifold |
| Description_TRA |
Manifold ht: A-3.9", B-4.6" |
| Description_TRA |
Carb pad height: 4.25" |
| Description_TRA |
Carb recommendations: Contact www.HotRodCarbs.com |
| Description_TRA |
Port exit dimensions: 1.12" x 1.87" |
| Description_TRA |
Recommended intake gasket: Edelbrock #7201. |
| Description_TRA |
Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA |
Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage. |
| Description_TRA |
NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal. |
| Description_TRA |
DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread. |
| Description_TRA |
Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| Description_TRA |
H.E.I. will not fit. |
| Description_TRA |
Carb center-to-center distance: 5-1/2" |
| Description_TRA |
Carb pad machined for 4-bolt carburetors |
| Description_TRA |
Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality. |
| Description_TRA |
Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage. |
| Grade Type |
Performance |
| Material |
Aluminum |
| Single Or Dual Plane Type |
Dual |
| CNC Ported |
No |
| Color |
Satin |
| EGR Port |
No |
| Rear Maximum Height |
4.600 |
| Flange Type |
2-Barrel 4-Bolt |
| Series |
Dual-Quad/Multi Carb |
| Basic Operating RPM Range |
1500-6500 |
| Vehicle Model |
Chevrolet |
| Center Maximum Height |
4.250 |
| Front Maximum Height |
3.900 |
| Gasket Or Seal Included |
No |
| RGL |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Length |
6.0000 |
| Width |
11.0000 |
| Height |
22.0000 |
| Weight |
17.0000 |
