Edelbrock part #5056 Torker II 460 intake manifold is designed for 429/460 c.i.d. Ford V8's used in marine and high performance applications. Manifold not equipped with EGR. Will fit 429 Cobra-Jets. Manifold will not accept stock Motorcraft spread-bore carburetor. Will not fit 1988 and later models.
Specifications:
| Description_ABR |
Intake Mnfld |
| Description_ASM |
Ford:Big-Block:429 (7.0L )/460 (7.5L) |
| Description_DEF |
Engine Intake Manifold |
| Description_EXT |
Edelbrock Torker II 460 Intake Manifold for Ford 429/460 Big-Block V8 |
| Description_MKT |
Edelbrock part #5056 Torker II 460 intake manifold is designed for 429/460 c.i.d. Ford V8's used in marine and high performance applications. Manifold not equipped with EGR. Will fit 429 Cobra-Jets. Manifold will not accept stock Motorcraft spread-bore carburetor. Will not fit 1988 and later models. |
| Description_INV |
Torker 2 Ford 460 Intake Manifold |
| Description_LAB |
Torker II 460 Big Block Ford Intake Manifold |
| Description_TRA |
Intake gasket: Edelbrock #7223 or Fel-Pro #1230/#1231 |
| Description_TRA |
Manifold ht.: A-3.50", B-4.25" |
| Description_TRA |
Carb pad height: 3.87" |
| Description_TRA |
Carb recommendations: Edelbrock AVS2 or Performer Series 750-800 cfm. For automatic transmissions use #1483 and #1495 or #1844 |
| Description_TRA |
Port exit dimensions: 1.75" x 2.10" |
| Description_TRA |
Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA |
Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| Single Or Dual Plane Type |
Single |
| Basic Operating RPM Range |
2500-6500 |
| Color |
Satin |
| RGL |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Center Maximum Height |
3.870 |
| Front Maximum Height |
3.500 |
| Gasket Or Seal Included |
No |
| Vehicle Model |
Ford |
| Series |
Torker/Torker II |
| EGR Port |
No |
| Material |
Aluminum |
| CNC Ported |
No |
| Rear Maximum Height |
4.250 |
| Flange Type |
4150 |
| Grade Type |
Performance |
| Length |
8.0000 |
| Width |
15.0000 |
| Height |
24.0000 |
| Weight |
19.0000 |
