Edelbrock part #5056 Torker II Pontiac intake manifold is designed for 1965-79 street 389-455 c.i.d. Pontiac V8's. Can be used with Ram Air IV heads. Will not fit Ram Air V and 265/301 V8's or under Trans Am Shaker hood.
Specifications:
| Description_ABR |
Intake Mnfld |
| Description_ASM |
Pontiac:-:326 (5.3L)/350 (5.7L)/389 (6.4L)/400 (6.6L)/421 (6.9L)/428 (7.0L)/455 (7.4) |
| Description_DEF |
Engine Intake Manifold |
| Description_EXT |
Edelbrock Torker II Pontiac Intake Manifold for Pontiac 326-455 V8 |
| Description_INV |
Torker 2 Pontiac Intake Manifold |
| Description_LAB |
Torker II Pontiac 326-455 Intake Manifold |
| Description_MKT |
Edelbrock part #5056 Torker II Pontiac intake manifold is designed for 1965-79 street 389-455 c.i.d. Pontiac V8's. Can be used with Ram Air IV heads. Will not fit Ram Air V and 265/301 V8's or under Trans Am Shaker hood. |
| Description_TRA |
Recommended intake gasket: Edelbrock #7280 |
| Description_TRA |
No provisions for OEM choke |
| Description_TRA |
OEM carb requires conversion to electric/manual choke |
| Description_TRA |
For 1968-71 use Edelbrock #8015 throttle bracket |
| Description_TRA |
Manifold height: .400" taller than stock, A-6.03", B-7.15 measured to engine block |
| Description_TRA |
Carb pad height: 6.59" |
| Description_TRA |
Carb recommendations: Edelbrock AVS2 or Performer Series 750-800 cfm. |
| Description_TRA |
Port exit dimensions: 1.10" x 2.06" |
| Description_TRA |
Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA |
Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| Material |
Aluminum |
| Grade Type |
Performance |
| Center Maximum Height |
6.590 |
| Rear Maximum Height |
7.150 |
| Single Or Dual Plane Type |
Single |
| Series |
Torker/Torker II |
| Color |
Satin |
| Gasket Or Seal Included |
No |
| Basic Operating RPM Range |
2500-6500 |
| EGR Port |
No |
| Flange Type |
4150 |
| RGL |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Front Maximum Height |
6.030 |
| CNC Ported |
No |
| Vehicle Model |
Pontiac |
| Length |
8.0000 |
| Width |
15.0000 |
| Height |
24.0000 |
| Weight |
18.0000 |
