Edelbrock part #5002 Torker-Plus Camshaft is designed for small-block Chevy 283-350 V-8 applications. The camshaft works well with Torker II manifolds for performance from 2500 to 6500 rpm, this camshaft is ideal for high-performance street, drag or marine applications. Torker-Plus cams have a slightly rough idle and are not suitable for trucks or towing applications. Hydraulic flat tappet lifters are included with each camshaft. Camshaft Specifications: - Duration @ .050 Intake: 232 degrees - Duration @ .050 Exhaust: 234 degrees - Lift @ Valve Intake: .488" - Lift @ Valve Exhaust: .488" - Lobe Separation: 108 Degrees - Intake Centerline: 106 Degrees
Specifications:
| Description_ABR |
Cam Lift kit |
| Description_ASM |
Chevrolet:Small-Block Gen I:302 (4.9L)/327 (5.4L)/350 (5.7L)/400 (6.6L) |
| Description_DEF |
Engine Camshaft and Lifter Kit |
| Description_EXT |
Edelbrock part #5002 Torker-Plus Camshaft is designed for small-block Chevy 283-350 V-8 applications. The camshaft works well with Torker II manifolds for performance from 2500 to 6500 rpm. |
| Description_LAB |
Torker-Plus Camshaft Kit for 1957-1986 Small-Block Chevy 283-400 V8 |
| Description_TRA |
Recommended Valve Springs for OEM heads: Edelbrock part #5703 |
| Description_TRA |
Adjustable valvetrain required |
| Description_TRA |
In order for this Performer RPM cam and lifter kit to be covered under ANY WARRANTY you MUST use the correct Edelbrock Sure Seat Valve Springs or equivalent. |
| Description_TRA |
Do not use rotator type valve springs or retainers for this application. |
| Description_TRA |
Oil/additive must contain Zinc designed for use with flat tappet camshafts. |
| Description_TRA |
Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up. |
| Description_TRA |
Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm. |
| Description_MKT |
Edelbrock part #5002 Torker-Plus Camshaft is designed for small-block Chevy 283-350 V-8 applications. The camshaft works well with Torker II manifolds for performance from 2500 to 6500 rpm, this camshaft is ideal for high-performance street, drag or marine applications. Torker-Plus cams have a slightly rough idle and are not suitable for trucks or towing applications. Hydraulic flat tappet lifters are included with each camshaft. Camshaft Specifications: - Duration @ .050 Intake: 232 degrees - Duration @ .050 Exhaust: 234 degrees - Lift @ Valve Intake: .488" - Lift @ Valve Exhaust: .488" - Lobe Separation: 108 Degrees - Intake Centerline: 106 Degrees |
| Description_INV |
Edelbrock Torker-Plus Camshaft Kit |
| Intake Valve Lift |
0.488 |
| Intake Duration .050 Inch Lift |
232 |
| Cam Type |
Cast |
| Advertised Exhaust Duration |
300 |
| RGL |
WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Lifter Materials |
Hardened Steel |
| Exhaust Duration at .050 inch Lift |
234 |
| Grade Type |
Performance |
| Computer Controlled Compatible |
No |
| Exhaust Valve Lift |
0.488 |
| Lifter Type |
Hydraulic |
| Lobe Separation |
108 |
| Advertised Intake Duration |
292 |
| Length |
4.0000 |
| Width |
8.0000 |
| Height |
27.0000 |
| Weight |
14.0000 |
