Edelbrock Supercharged LT1 crate engine. part #46757 produces an astounding 851 horsepower and 780 ft-lbs. of torque on 91 octane pump gas. The foundation of this engine is a brand new GM LT1 Gen V aluminum block with a forged and balanced Manley crankshaft, forged Manley H-Beam connecting rods and Manley forged aluminum pistons. Sitting on top is an Edelbrock supercharger system with a DP-3C intercooler and Eaton TVS R2650 rotors. This engine package comes complete with essential supercharger kit components, such as the electric intercooler water pump, intercooler plumbing, intercooler recovery tank, fuel rails, fuel injectors, mass air flow sensor (MAFS) housing and re-usable air filter. The supercharger equipped on this engine features a driver's side throttle body orientation for ease of intake routing and Camaro ZL1/ CTS-V LT4 belt offset for a compact installation. Pair with universal heat exchangers for a complete installation. Engine block is a GM LT1 Gen V with a Manley Forged 4340 crankshaft.
Specifications:
| Description_ABR |
CRATE ENGINE |
| Description_DEF |
Engine Complete Assembly |
| Description_MKT |
Edelbrock Supercharged LT1 crate engine. part #46757 produces an astounding 851 horsepower and 780 ft-lbs. of torque on 91 octane pump gas. The foundation of this engine is a brand new GM LT1 Gen V aluminum block with a forged and balanced Manley crankshaft, forged Manley H-Beam connecting rods and Manley forged aluminum pistons. Sitting on top is an Edelbrock supercharger system with a DP-3C intercooler and Eaton TVS R2650 rotors. This engine package comes complete with essential supercharger kit components, such as the electric intercooler water pump, intercooler plumbing, intercooler recovery tank, fuel rails, fuel injectors, mass air flow sensor (MAFS) housing and re-usable air filter. The supercharger equipped on this engine features a driver's side throttle body orientation for ease of intake routing and Camaro ZL1/ CTS-V LT4 belt offset for a compact installation. Pair with universal heat exchangers for a complete installation. Engine block is a GM LT1 Gen V with a Manley Forged 4340 crankshaft. |
| Description_LAB |
Crate Engine #46757 GM LT1 Gen V 416, Supercharged, 851 HP, 779 ft-lbs |
| Description_EXT |
Edelbrock Supercharged LT416 Crate Engine With Accessories and Electronics |
| Description_INV |
CRATE ENG. LT416 SUPER. W/ACC./ELECT. |
| Description_TRA |
LT 416 Crate Engine with Accessories & Electronics. This engine will require an EFI compatible fuel delivery system with a minimum flow of 100 gph @ 60 PSI. Fuel pressure regulator is required. Top of supercharger measures 20.80" from crank centerline. Supplied with Edelbrock Break-In Oil in the crate. Before starting engine, you will need to prime the oil system. Do not turn engine over with starter motor for priming. |
| Carburetor Choke Type |
N/A |
| Pulley Belt Width |
8-Rib |
| Idler Pulley Included |
Yes |
| Manifold Material |
N/A |
| Piston Type |
Forged Aluminum |
| Type |
GM LT1 Gen V |
| Engine Block Material |
Cast Iron |
| Plug Wire and Boot Included |
Yes |
| Air Cleaner Type |
Conical |
| Rotor Type |
Eaton TVS 2650, Black Powder Coated |
| Camshaft Type |
243deg/254deg, .660/.651, 114 LSA |
| Intake Manifold Type |
EFI |
| Rear Main Seal Type |
1-Piece |
| Timing Cover Included |
Yes |
| Wire Harness Included |
Yes |
| Torque |
779 |
| Oil Filter Included |
Yes |
| Alternator Included |
No |
| Distributor Included |
No |
| Cylinder Head Type |
Performer RPM |
| Quantity |
Sold Individually |
| Rocker Arm Ratio |
GM OEM |
| RGL |
WARNING: This product can expose you to Chromium, Lead, and Zinc which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Horsepower |
851 |
| Carburetor Type |
Not Included |
| Rocker Arm Type |
LT1 |
| Valve Cover Included |
Yes |
| Displacement |
416 |
| Oil Pan Included |
Yes |
| Induction Type |
Supercharged |
| Valve Cover Type |
OEM, Black Powder Coated |
| Construction Type |
Assembled |
| Throttle Body Included |
Yes |
| Ignition Coil Included |
No |
| ECU Included |
No |
| Hardware Included |
Yes |
| Harmonic Balancer Included |
Yes |
| Valve Cover Material |
Cast Aluminum |
| Main Bearing Cap Bolt Quantity |
4-Bolt |
| Cylinder Head Material |
Aluminum |
| Grade Type |
Performance |
| Spark Plugs Included |
No |
| Compression Ratio |
10.6:1 |
| Flywheel Included |
No |
| Universal Or Specific Fit |
Specific Fit |
| Calibration |
Yes |
| Water Pump Included |
Yes, Standard |
| Outside Pulley Diameter |
3.25 |
| Crankshaft Material |
Forged Steel |
| Length |
45.0000 |
| Width |
41.0000 |
| Height |
48.0000 |
| Weight |
674.0000 |
