Edelbrock part #46750 Supercharged LS 416 crate engine produces an astounding 720 horsepower and 695 ft-lbs. of torque. The foundation of this engine is a brand new, aluminum LS3 block with a forged and balanced Manley crankshaft, forged Manley H-Beam connecting rods and Manley forged aluminum pistons. This engine features an Edelbrock supercharger with Eaton TVS 2300cc/rev rotors. Also included are the essential supercharger kit components, such as the electric intercooler water pump, intercooler plumbing and intercooler recovery tank, as well as fuel rails, 60 lb./hr. fuel injectors, mass air flow sensor (MAFS) housing and re-usable air filter. The supercharger equipped on this engine features a driver's side throttle body orientation for ease of intake routing and a Corvette belt offset. Pair with universal heat exchangers for a complete installation. Engine Specifications: Displacement: 416 c.i.d.
Specifications:
| Description_ABR |
CRATE ENGINE |
| Description_ASM |
Chevrolet:Small-Block Gen IV LS3:416 (6.8L) |
| Description_DEF |
Engine Complete Assembly |
| Description_MKT |
Edelbrock part #46750 Supercharged LS 416 crate engine produces an astounding 720 horsepower and 695 ft-lbs. of torque. The foundation of this engine is a brand new, aluminum LS3 block with a forged and balanced Manley crankshaft, forged Manley H-Beam connecting rods and Manley forged aluminum pistons. This engine features an Edelbrock supercharger with Eaton TVS 2300cc/rev rotors. Also included are the essential supercharger kit components, such as the electric intercooler water pump, intercooler plumbing and intercooler recovery tank, as well as fuel rails, 60 lb./hr. fuel injectors, mass air flow sensor (MAFS) housing and re-usable air filter. The supercharger equipped on this engine features a driver's side throttle body orientation for ease of intake routing and a Corvette belt offset. Pair with universal heat exchangers for a complete installation. Engine Specifications: Displacement: 416 c.i.d. |
| Description_MKT |
Bore: 4.065in |
| Description_MKT |
Stroke: 4.000 in |
| Description_MKT |
Horsepower: 720 hp |
| Description_MKT |
Torque: 695 ft-lbs. |
| Description_MKT |
Compression: 9.5:1 |
| Description_MKT |
Block: LS3 Aluminum Crankshaft: Forged |
| Description_MKT |
4340 |
| Description_MKT |
Pistons: Forged Aluminum - 18cc |
| Description_MKT |
Rods: Forged H-Beam |
| Description_MKT |
Camshafts: 215 Deg /247 Deg , .629/.656, 121 LSA |
| Description_MKT |
Rocker Arms: LS3, 1.7 ratio |
| Description_MKT |
Induction: Supercharger System #1540 |
| Description_MKT |
Cylinder Heads: GM with Edelbrock Valve Springs #5768 |
| Description_MKT |
Finish: Black powder coated |
| Description_MKT |
Warranty: 2-year / Unlimited mileage |
| Description_MKT |
Suggested Fuel: 91 octane pump gas. |
| Description_LAB |
Crate Engine #46750 GM LS3 Gen V 416, Supercharged, 720 HP, 695 ft-lbs |
| Description_INV |
Supercharged LS 416 crate engine EFI |
| Description_EXT |
Edelbrock part #46750 Supercharged LS 416 crate engine is a complete 416 c.i.d. supercharged, LS engine, that produces an astounding 720 horsepower and 695 ft-lbs. of torque, on 91 octane pump gas |
| Description_TRA |
This engine package includes an Edelbrock prepped long block supercharger, complete engine wiring harness, pre-programmed ECU, electronic throttle pedal, MAFS, throttle body, ignition coils and heated oxygen sensors. This engine is tuned and ready to run right-out-of-the-crate, making it ideal for any project vehicle desiring an LS3 high Performance solution. Your engine is supplied with Edelbrock Break-In Oil. Before starting engine, you will need to prime the oil system. Do not turn engine over with starter motor for priming. |
| Timing Cover Included |
Yes |
| Water Pump Included |
Yes, Standard |
| Intake Manifold Type |
EFI |
| Cylinder Head Material |
Aluminum |
| Oil Filter Included |
Yes |
| Quantity |
Sold Individually |
| Carburetor Choke Type |
N/A |
| Harmonic Balancer Included |
Yes |
| Rotor Type |
Eaton TVS 2300, Black Powder Coated |
| Manifold Material |
Aluminum |
| Piston Type |
Forged Aluminum |
| Fuel Injectors Included |
Yes |
| Type |
GM LS3 Gen V |
| Plug Wire and Boot Included |
Yes |
| Idler Pulley Included |
Yes |
| Air Cleaner Type |
Conical |
| Horsepower |
720 |
| ECU Included |
Yes |
| Throttle Body Included |
Yes |
| Carburetor Type |
Not Included |
| RGL |
WARNING: This product can expose you to Chromium, Lead, and Zinc which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Main Bearing Cap Bolt Quantity |
4-Bolt |
| Pulley Belt Width |
Stock |
| Cylinder Head Type |
GM LSA With Edelbrock Valve Springs #5768 |
| Induction Type |
Supercharged |
| Engine Block Material |
Cast Iron |
| Rear Main Seal Type |
1-Piece |
| Rocker Arm Ratio |
1.7:1 |
| Crankshaft Material |
Forged Steel |
| Universal Or Specific Fit |
Specific Fit |
| Hardware Included |
Yes |
| Valve Cover Type |
OEM, Black Powder Coated |
| Rocker Arm Type |
LS3 |
| Camshaft Type |
215deg/247deg, .629/.656, 121 LSA |
| Wire Harness Included |
Yes |
| Distributor Included |
No |
| Displacement |
416 |
| Oil Pan Included |
Yes |
| Valve Cover Included |
Yes |
| Spark Plugs Included |
No |
| Alternator Included |
Yes |
| Grade Type |
Performance |
| Compression Ratio |
9.5:1 |
| Calibration |
Yes |
| Flywheel Included |
No |
| Power Steering Pump Included |
Yes |
| Construction Type |
Assembled |
| Outside Pulley Diameter |
Stock |
| Torque |
695 |
| Valve Cover Material |
Cast Aluminum |
| Length |
36.0000 |
| Width |
39.0000 |
| Height |
37.0000 |
| Weight |
477.0000 |
