Edelbrock 426 c.i.d. HEMI crate engine part #46126 produces an astounding 808 horsepower and 762 ft-lbs. of torque. The foundation is based on a new iron Mopar 392 block with a forged Manley crankshaft, forged Manley H-Beam connecting rods and forged aluminum pistons. Sitting on top is an Edelbrock supercharger system with Eaton TVS R2650 rotors. Also included are the essential supercharger kit components, such as the electric intercooler water pump, intercooler plumbing, intercooler recovery tank, as well as fuel rails, fuel injectors, coils, mass air flow sensor (MAFS) housing and re-usable air filter. The supercharger equipped on this engine features a driver's side throttle body orientation for ease of intake routing. Pair with universal heat exchangers for a complete installation. Engine Specifications: Displacement: 426 c.i.d.
Specifications:
| Description_ABR |
CRATE ENGINE |
| Description_ASM |
Chrysler:Gen II HEMI:426 (7.0L) |
| Description_DEF |
Engine Complete Assembly |
| Description_MKT |
Edelbrock 426 c.i.d. HEMI crate engine part #46126 produces an astounding 808 horsepower and 762 ft-lbs. of torque. The foundation is based on a new iron Mopar 392 block with a forged Manley crankshaft, forged Manley H-Beam connecting rods and forged aluminum pistons. Sitting on top is an Edelbrock supercharger system with Eaton TVS R2650 rotors. Also included are the essential supercharger kit components, such as the electric intercooler water pump, intercooler plumbing, intercooler recovery tank, as well as fuel rails, fuel injectors, coils, mass air flow sensor (MAFS) housing and re-usable air filter. The supercharger equipped on this engine features a driver's side throttle body orientation for ease of intake routing. Pair with universal heat exchangers for a complete installation. Engine Specifications: Displacement: 426 c.i.d. |
| Description_MKT |
Bore: 4.090in |
| Description_MKT |
Stroke: 4.050in |
| Description_MKT |
Horsepower: 808 |
| Description_MKT |
Torque: 762 |
| Description_MKT |
Compression: 9.9:1 |
| Description_MKT |
Block: New Mopar Iron |
| Description_MKT |
Crankshaft: Forged 4340 |
| Description_MKT |
Pistons: Forged Aluminum -5cc |
| Description_MKT |
Camshaft: 226 Deg /234 Deg , .619/.612, 114 cl |
| Description_MKT |
Rocker Arms: Stock Gen III Hemi |
| Description_MKT |
Cylinder Heads: Edelbrock Performer RPM #61099 |
| Description_MKT |
Fuel Injectors: 60 lb./hr., Siemens |
| Description_MKT |
Supercharger: Edelbrock R2650 TVS |
| Description_MKT |
Supercharger Belt: 100" 6-Rib |
| Description_MKT |
Fuel Type: Requires 91 Octane Minimum |
| Description_LAB |
Crate Engine #46126 Chrysler HEMI Gen III 426, Supercharged, 808 HP, 762 ft-lbs |
| Description_EXT |
Edelbrock part #46126 GEN III 426 HEMI supercharged crate engine. Now you can get a complete 426 c.i.d. E-Force supercharged, Gen III HEMI engine, that produces an astounding 808 horsepower and 762 ft-lbs. of torque for your Mopar. |
| Description_INV |
Supercharged GEN III 426 HEMI engine |
| Description_TRA |
Gen III 426 HEMI Crate Engine with Accessories (Electronics not included) |
| Description_TRA |
This engine will require an EFI compatible fuel delivery system with a minimum flow of 100 gph @ 70 PSI. Fuel pressure regulator with boost reference is required. Top of supercharger measures 20.74" from crank centerline. |
| Description_TRA |
A Mopar Oil Pan (PN 4893207AA) is used on this crate engines. NOTE: Mopar 45 Deg oil filter adaptor PN 53021610AF (not included) may be required for additional clearance on some applications. |
| Description_TRA |
Your engine is supplied with Edelbrock Break-In Oil. Before starting engine, you will need to prime the oil system. Do not turn engine over with starter motor for priming. |
| Rocker Arm Ratio |
Mopar OEM |
| Rocker Arm Type |
N/A |
| Hardware Included |
Yes |
| Spark Plugs Included |
Yes |
| Oil Pan Included |
Yes |
| Main Bearing Cap Bolt Quantity |
4-Bolt |
| Horsepower |
808 |
| RGL |
WARNING: This product can expose you to Chromium, Lead, and Zinc which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Universal Or Specific Fit |
Specific Fit |
| Wire Harness Included |
No |
| Throttle Body Included |
Yes, Hellcat 92mm |
| Crankshaft Material |
Forged Steel |
| Valve Cover Material |
Cast Aluminum |
| Compression Ratio |
9.9:1 |
| Outside Pulley Diameter |
N/A |
| Camshaft Type |
226deg/234deg, .619/.612, 116 LSA Hydraulic Roller |
| Torque |
762 |
| Grade Type |
Performance |
| Displacement |
426 |
| Valve Cover Type |
HEMI OEM, Black |
| Distributor Included |
No |
| Induction Type |
Supercharged |
| Valve Cover Included |
Yes |
| Cylinder Head Type |
Performer RPM |
| Rotor Type |
Eaton TVS 2650, Black Powder Coated |
| Manifold Material |
Aluminum |
| Rear Main Seal Type |
1-Piece |
| Pulley Belt Width |
N/A |
| Timing Cover Included |
Yes |
| Flywheel Included |
No |
| Carburetor Choke Type |
N/A |
| Carburetor Type |
Not Included |
| Construction Type |
Assembled |
| Piston Type |
Forged Aluminum |
| Water Pump Included |
Yes, Standard |
| Plug Wire and Boot Included |
Not Included |
| Fuel Rails Included |
Yes |
| Harmonic Balancer Included |
Yes |
| Fuel Injectors Included |
Yes |
| Cylinder Head Material |
Aluminum |
| Intake Manifold Type |
Dual Pass, Black Textured Powder Coated |
| Engine Block Material |
Cast Iron |
| Quantity |
Sold Individually |
| Idler Pulley Included |
Yes |
| Type |
Chrysler HEMI Gen III |
| Oil Filter Included |
Yes |
| Air Cleaner Type |
Not Included |
| Length |
45.0000 |
| Width |
36.0000 |
| Height |
37.0000 |
| Weight |
744.0000 |
