Edelbrock part #45271 Performer RPM small-block Ford 347 crate engine offers the best of quality and performance with 438 HP & 413 ft/lbs. of torque. This engine combines a Dart cast iron 4 bolt main block and a forged Scat rotating assembly with the Edelbrock Power Package. This Performer RPM 347 engine includes a Milodon oil pan and pickup designed for use with 1974 and later applications as well as street rods that require a rear sump to clear the crossmember and/or suspension Engine Specifications: - Finish: Polished - Displacement: 347 c.i.d. - Horsepower: 438 hp - Torque: 413 ft-lbs. - Compression: 9.5:1 - Block: Dart Small-block (8.2" deck height) - Crankshaft: Scat Forged Steel - Pistons: Scat Forged - Camshaft: Rollin' Thunder Hydraulic Roller #2281 - Rocker Arms: 1.6:1 Roller #77780 - Manifold: RPM Air-Gap #75211 - Cylinder Heads: Performer RPM #602515 - Carburetor: Thunder Series AVS 800 cfm - Water Pump: Victor series aluminum #8846 - Distributor: Included - Valve Covers: Elite II - Warranty: 2-year / Unlimited mileage
Specifications:
| Description_ABR |
CRATE ENGINE |
| Description_ASM |
Ford:Small-Block Windsor:260 (4.3L)/289 (4.7L)/302 (5.0L) |
| Description_DEF |
Engine Complete Assembly |
| Description_LAB |
Performer RPM 347 Ford Crate Engine |
| Description_EXT |
Edelbrock part #45270 Performer RPM 347 small-block Ford crate engine (rear sump oil pan) offers the best of quality and performance with 438 HP & 413 ft/lbs of torque right out of the crate |
| Description_INV |
Performer RPM 347 Ford crate engine |
| Description_MKT |
Edelbrock part #45271 Performer RPM small-block Ford 347 crate engine offers the best of quality and performance with 438 HP & 413 ft/lbs. of torque. This engine combines a Dart cast iron 4 bolt main block and a forged Scat rotating assembly with the Edelbrock Power Package. This Performer RPM 347 engine includes a Milodon oil pan and pickup designed for use with 1974 and later applications as well as street rods that require a rear sump to clear the crossmember and/or suspension Engine Specifications: - Finish: Polished - Displacement: 347 c.i.d. - Horsepower: 438 hp - Torque: 413 ft-lbs. - Compression: 9.5:1 - Block: Dart Small-block (8.2" deck height) - Crankshaft: Scat Forged Steel - Pistons: Scat Forged - Camshaft: Rollin' Thunder Hydraulic Roller #2281 - Rocker Arms: 1.6:1 Roller #77780 - Manifold: RPM Air-Gap #75211 - Cylinder Heads: Performer RPM #602515 - Carburetor: Thunder Series AVS 800 cfm - Water Pump: Victor series aluminum #8846 - Distributor: Included - Valve Covers: Elite II - Warranty: 2-year / Unlimited mileage |
| Description_TRA |
There is no oil in your engine. |
| Description_TRA |
Your engine is supplied with 6 Qtrs. of Edelbrock Break-In Oil in the crate. Before starting engine, you will need to prime the oil system. |
| Description_TRA |
Equipped with 3-bolt pulley damper, right-hand inlet water pump and left-hand timing pointer. Optional 4-bolt pulley damper, left-hand inlet water pump and right-hand timing pointer available by request. |
| Description_TRA |
Rear sump engines can install a Milodon dipstick (Milodon #22040) into the threaded hole on the oil pan or an OEM dipstick (Ford #M-6750-C303) into the block directly above the oil pan bung. |
| Description_TRA |
Any dipstick holes that are not used must be plugged. The threaded provision on the Milodon oil pan will require a 5/8"-18 plug. Remove any paint from the engine mount bosses, cylinder block to clutch housing or transmission mounting surface, and the crankshaft flange before installing engine. |
| Type |
Small-Block Ford |
| Cylinder Head Material |
Aluminum |
| Carburetor Choke Type |
Electric |
| Valve Cover Type |
Elite II, Tall Profile, Polished |
| Wire Harness Included |
No |
| Valve Cover Material |
Cast Aluminum |
| Distributor Included |
Yes |
| Carburetor Type |
Thunder AVS2 800 CFM, Satin |
| Grade Type |
Performance |
| Rear Main Seal Type |
1-Piece |
| Valve Cover Included |
Yes |
| Harmonic Balancer Included |
Yes |
| Piston Type |
Forged Aluminum |
| Engine Block Material |
Cast Iron |
| Plug Wire and Boot Included |
No |
| Water Pump Included |
Yes, Standard |
| Flywheel Included |
No |
| Quantity |
Sold Individually |
| Intake Manifold Type |
Performer RPM Air-Gap, Dual 4150, Polished |
| Rocker Arm Type |
Roller |
| Oil Pan Included |
Yes, Rear Sump |
| Air Cleaner Type |
Not Included |
| Rocker Arm Ratio |
1.6:1 |
| Main Bearing Cap Bolt Quantity |
4-Bolt |
| Oil Filter Included |
Yes |
| Manifold Material |
Aluminum |
| RGL |
WARNING: This product can expose you to Chromium, Lead, and Zinc which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Crankshaft Material |
Forged Steel |
| Compression Ratio |
9.5:1 |
| Spark Plugs Included |
No |
| Camshaft Type |
Rollin' Thunder, Hydraulic Roller |
| Construction Type |
Assembled |
| Torque |
413 |
| Hardware Included |
Yes |
| Horsepower |
438 |
| Displacement |
347 |
| Throttle Body Included |
No |
| Cylinder Head Type |
Performer RPM |
| Universal Or Specific Fit |
Specific Fit |
| Timing Cover Included |
Yes |
| Length |
31.0000 |
| Width |
27.0000 |
| Height |
40.0000 |
| Weight |
430.0000 |
