Edelbrock part #28456 Victor JR. LS3 intake manifold is designed for Gen IV LS engines equipped with LS3, L92 and L76 cylinder heads. This manifold is for EFI racing applications operating between 3500-7500 rpm. The Edelbrock Victor JR. LS3 intake manifold comes with an MSD #6014 Timing Control Module. This manifold uses a standard square bore throttle body flange that is compatible with both Edelbrock EFI intake elbows with single bore 90mm throttle body or four-barrel #4150 throttle bodies. This intake has additional bosses and machining that allow for the use of fuel injectors when combined with the #3638 fuel rail kit (sold separately). The LS3, L92 and L76 all use the same cylinder head.
Specifications:
| Description_ABR |
Intake Mnfld |
| Description_ASM |
Chevrolet:Small-Block Gen IV L76:364 (6.0L)/376 (6.2L) |
| Description_ASM |
Chevrolet:Small-Block Gen IV L92:364 (6.0L)/376 (6.2L) |
| Description_ASM |
Chevrolet:Small-Block Gen IV L99:364 (6.0L)/376 (6.2L) |
| Description_ASM |
Chevrolet:Small-Block Gen IV LS3:364 (6.0L)/376 (6.2L) |
| Description_DEF |
Engine Intake Manifold |
| Description_INV |
Victor Jr W/ Electronic Carb LS3/L76/L92 |
| Description_EXT |
Edelbrock Victor Jr W/ Electronic Carb LS3/L76/L92 Intake Manifold GM LS Engines |
| Description_MKT |
Edelbrock part #28456 Victor JR. LS3 intake manifold is designed for Gen IV LS engines equipped with LS3, L92 and L76 cylinder heads. This manifold is for EFI racing applications operating between 3500-7500 rpm. The Edelbrock Victor JR. LS3 intake manifold comes with an MSD #6014 Timing Control Module. This manifold uses a standard square bore throttle body flange that is compatible with both Edelbrock EFI intake elbows with single bore 90mm throttle body or four-barrel #4150 throttle bodies. This intake has additional bosses and machining that allow for the use of fuel injectors when combined with the #3638 fuel rail kit (sold separately). The LS3, L92 and L76 all use the same cylinder head. |
| Description_LAB |
Victor Jr Small Block Chevy W/ Electronic Carb LS3/L76/L92 Intake Manifold |
| Description_TRA |
Uses LS3/L76/L92 style individual port O-ring seals GM PN19256623 |
| Description_TRA |
4150 Carb flange |
| Description_TRA |
Throttle body recommendations: Edelbrock #38783 |
| Description_TRA |
L92 heads are intended for 4.00" bores and will not work with 5.7L blocks without valve reliefs |
| Description_TRA |
Comes with MSD control Module #6014 |
| Description_TRA |
Manifold Dimensions: Roof to bolt centerline-1.85", Floor to bolt centerline -0.57", Hieght-2.42", Carb pad height 7.40" |
| Finish |
Satin |
| EGR Port |
No |
| Series |
Victor |
| Flange Type |
4150 |
| Grade Type |
Performance |
| Material |
Aluminum |
| Single Or Dual Plane Type |
Single |
| CNC Ported |
No |
| Rear Maximum Height |
6.000 |
| Center Maximum Height |
6.000 |
| Front Maximum Height |
6.000 |
| Basic Operating RPM Range |
3500-7500 |
| Vehicle Model |
Chevrolet |
| Gasket Or Seal Included |
No |
| RGL |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Length |
9.0000 |
| Width |
16.0000 |
| Height |
23.0000 |
| Weight |
34.0000 |
