Edelbrock part #2176 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
Specifications:
| Description_ABR |
Intake Mnfld |
| Description_ASM |
Chrysler:Small-Block LA-Series:273 (4.5L)/318 (5.2L)/340 (5.6L)/360 (5.9L) |
| Description_DEF |
Engine Intake Manifold |
| Description_LAB |
Performer 318/360 Intake Manifold for Small-Block Chrysler, LA Series Engines |
| Description_EXT |
Edelbrock Performer 318/360 Intake Manifold for 1966-87 Chrysler "LA" Small-Block Engines is Designed for Street 318-340-360 c.i.d. Accepts Either OEM 4-bbl or 4150-Style Square-Bore Carburetors. Non-EGR |
| Description_INV |
Performer Chrysler 318-360 Intake Mnfld |
| Description_MKT |
Edelbrock part #2176 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8's. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. |
| Description_TRA |
Recommended intake gasket: Edelbrock #7276, Chrysler #4494462AB for 318, #4397642 for 340 and 360 (or equivalent) |
| Description_TRA |
Manifold height: A-4.13", B-5.13" |
| Description_TRA |
Carb pad height: 4.63" |
| Description_TRA |
Carb recommendations: OEM 4-Bbl, Edelbrock AVS@ or Performer Series 600-650 cfm. Use #1481 #1483 throttle/transmission lever kit. |
| Description_TRA |
Port exit dimensions: .97" x 1.95" |
| Description_TRA |
Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA |
Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| Grade Type |
Performance |
| Single Or Dual Plane Type |
Dual |
| Series |
Performer |
| Material |
Aluminum |
| Basic Operating RPM Range |
Idle-5500 |
| Gasket Or Seal Included |
No |
| Front Maximum Height |
4.130 |
| EGR Port |
No |
| RGL |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Vehicle Model |
Chrysler |
| Center Maximum Height |
4.630 |
| Finish |
Satin |
| Flange Type |
4150 |
| Rear Maximum Height |
5.130 |
| CNC Ported |
No |
| Length |
8.0000 |
| Width |
15.0000 |
| Height |
24.0000 |
| Weight |
21.0000 |
