Edelbrock part #2151 Performer Oldsmobile 455 intake manifold is designed for street 400-425-455 c.i.d. applications. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. Includes exhaust crossover plugs #2733 which must be used for marine and off-road use.
Specifications:
| Description_ABR |
Intake Mnfld |
| Description_ASM |
Oldsmobile:Big-Block:400 (6.6L)/425 (7.0L)/455 (7.5L) |
| Description_DEF |
Engine Intake Manifold |
| Description_EXT |
Edelbrock Performer Olds 455 Intake Manifold for 400-425-455 c.i.d. Oldsmobile V8 Engines. Includes Exhaust Crossover Plugs #2733, which Must be used for Marine and Off-Road. Accepts OEM or 4150-Style Carburetors. Non-EGR |
| Description_INV |
Performer Oldsmobile 400-455 Intk Mnfld |
| Description_MKT |
Edelbrock part #2151 Performer Oldsmobile 455 intake manifold is designed for street 400-425-455 c.i.d. applications. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. Includes exhaust crossover plugs #2733 which must be used for marine and off-road use. |
| Description_TRA |
For correct gasket kit when using #2151 in a marine/ competition application, contact Mondello Performance at (805) 237-8808. |
| Description_TRA |
Manifold height: A-4.40", B-5.50" |
| Description_TRA |
Carb pad height: 4.95" |
| Description_TRA |
Carb recommendations: Edelbrock AVS2 or Performer Series 750-800cfm |
| Description_TRA |
Port exit dimensions: 1.22" x 2.22" |
| Description_TRA |
Manifold has no provision for OEM choke operation. |
| Description_TRA |
Will not fit Toronado or 4-4-2 Ram-Air scoop without hood modification or 1964-67 Cutlass |
| Description_TRA |
HEI will clear |
| Description_TRA |
Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA |
Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| Description_LAB |
Performer Intake Manifold for Olds 400-455, Non-EGR, Satin |
| Center Maximum Height |
4.950 |
| RGL |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Gasket Or Seal Included |
No |
| Front Maximum Height |
4.400 |
| Vehicle Model |
Oldsmobile |
| Grade Type |
Performance |
| Flange Type |
4150 |
| EGR Port |
No |
| Finish |
Satin |
| CNC Ported |
No |
| Material |
Aluminum |
| Series |
Performer |
| Single Or Dual Plane Type |
Dual |
| Basic Operating RPM Range |
Idle-5500 |
| Rear Maximum Height |
5.500 |
| Length |
8.0000 |
| Width |
15.0000 |
| Height |
24.0000 |
| Weight |
25.0000 |
