Edelbrock part #2131 Performer AMC intake manifold is designed for 1970-91 street 304-360-401 c.i.d. V8 engines. Will not accept stock Motorcraft spread-bore carburetor. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
Specifications:
| Description_ABR |
Intake Mnfld |
| Description_ASM |
AMC:Small-Block:304 (5.0L)/360 (5.9L)/401 (6.6L) |
| Description_DEF |
Engine Intake Manifold |
| Description_LAB |
Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish |
| Description_INV |
Perf AMC Intake Manifold 1970-91 290-401 |
| Description_EXT |
Edelbrock Performer AMC Intake Manifold for 1970 and Later 304-401 c.i.d. AMC V8 Engines is Designed for use with 4150-Style Square-Bore Carburetors. (Will not accept stock Motorcraft Carburetor). Non-EGR |
| Description_TRA |
Recommended intake gasket: Edelbrock #7213 Fel-Pro MS96011 |
| Description_TRA |
Must use factory style metal valley tray |
| Description_TRA |
Manifold height: A-4.20", B-5.50" |
| Description_TRA |
Carb pad height: 4.85" |
| Description_TRA |
Requires #8008 or #8024 Stud, nut and washer kit. |
| Description_TRA |
Car recommendations: OEM 4-Bbl . Non-EGR square-bore Edelbrock AVS2 or Performer Series 500-650cfm. |
| Description_TRA |
Port exit dimensions: 1.03" x 2.07" |
| Description_TRA |
#2131 must use factory style metal valley tray. |
| Description_TRA |
Manifolds have two center bolt holes offset. |
| Description_TRA |
Edelbrock bracket #8034 required for 1979 and later vehicles. |
| Description_TRA |
Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA |
Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| Description_TRA |
Manifold will not accept factory Motorcraft spread-bore carburetors. |
| Description_MKT |
Edelbrock part #2131 Performer AMC intake manifold is designed for 1970-91 street 304-360-401 c.i.d. V8 engines. Will not accept stock Motorcraft spread-bore carburetor. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. |
| Flange Type |
4150 |
| Single Or Dual Plane Type |
Dual |
| CNC Ported |
No |
| Finish |
Satin |
| Series |
Performer |
| Grade Type |
Performance |
| Rear Maximum Height |
5.500 |
| EGR Port |
No |
| Basic Operating RPM Range |
Idle-5500 |
| Front Maximum Height |
4.200 |
| Vehicle Model |
AMC/Jeep |
| Material |
Aluminum |
| RGL |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Center Maximum Height |
4.850 |
| Gasket Or Seal Included |
No |
| Length |
8.0000 |
| Width |
15.0000 |
| Height |
24.0000 |
| Weight |
20.0000 |
