Edelbrock Performer-Plus Camshaft #2112 is designed for 200-229 Chevy 90 Degree V6 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2112 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. For non-computer controlled vehicles and non-roller applications. Camshaft specifications: - Intake duration: 204 Degrees - Exhaust duration: 214 Degrees - Intake lift: .420" - Exhaust lift: .443" - Lobe separation: 112 Degree - Intake Center Line: 107 Degree - Vacuum: 16"
Specifications:
| Description_ABR |
Cam Lift kt |
| Description_ASM |
Chevrolet:Small-Block 90 Deg V6:200 (3.3L)/229 (3.8L)/262 (4.3L) |
| Description_DEF |
Engine Camshaft and Lifter Kit |
| Description_INV |
Edelbrock Performer-Plus Cam Kit #2112 |
| Description_EXT |
Edelbrock Performer-Plus #2112 is designed for 200-229 Chevy 90 Degree V6 engines and produce optimum torque from the low-end to the mid-range. |
| Description_LAB |
Edelbrock Performer-Plus Camshaft Kit for Chevy 200-229 90 Deg V6 |
| Description_TRA |
Recommended Valve Springs for OEM heads: Edelbrock part #5813 non-rotator/# 5913 Rotator |
| Description_TRA |
In order for this Performer-Plus cam and lifter kit to be covered under ANY WARRANTY you must use either the correct Edelbrock Sure Seat valve springs or the stock original equipment valve springs. |
| Description_TRA |
Oil/additive must contain Zinc designed for use with flat tappet camshafts. |
| Description_TRA |
Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up. |
| Description_TRA |
Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm. |
| Description_MKT |
Edelbrock Performer-Plus Camshaft #2112 is designed for 200-229 Chevy 90 Degree V6 engines and produce optimum torque from the low-end to the mid-range. Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2112 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. For non-computer controlled vehicles and non-roller applications. Camshaft specifications: - Intake duration: 204 Degrees - Exhaust duration: 214 Degrees - Intake lift: .420" - Exhaust lift: .443" - Lobe separation: 112 Degree - Intake Center Line: 107 Degree - Vacuum: 16" |
| Lifter Type |
Hydraulic |
| Lobe Separation |
112 |
| Advertised Intake Duration |
270 |
| Exhaust Valve Lift |
0.443 |
| Grade Type |
Performance |
| Intake Valve Lift |
0.420 |
| Cam Type |
Cast |
| Exhaust Duration at .050 inch Lift |
214 |
| Lifter Materials |
Hardened Steel |
| Computer Controlled Compatible |
No |
| RGL |
WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Advertised Exhaust Duration |
280 |
| Intake Duration .050 Inch Lift |
204 |
| Length |
4.0000 |
| Width |
8.0000 |
| Height |
27.0000 |
| Weight |
11.0000 |
