The Edelbrock #1901 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1901 is calibrated for single-quad applications and factory equipped with: Metering Jets - Primary .095, Secondary .095, Primary Rod .070 x .052, orange spring (5' Hg). Use carb Studs #8008 or #8024 if needed. Match with an Edelbrock intake manifold for the ultimate induction upgrade.
Specifications:
| Description_ABR |
CARB |
| Description_DEF |
Carburetor |
| Description_LAB |
AVS2 Carburetor #1901 500 CFM With Electric Choke, Satin Finish (Non-EGR) |
| Description_MKT |
The Edelbrock #1901 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1901 is calibrated for single-quad applications and factory equipped with: Metering Jets - Primary .095, Secondary .095, Primary Rod .070 x .052, orange spring (5' Hg). Use carb Studs #8008 or #8024 if needed. Match with an Edelbrock intake manifold for the ultimate induction upgrade. |
| Description_EXT |
The Edelbrock #1901 AV2 Series 500 cfm Carburetor is designed and calibrated for small cubic-inch single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. |
| Description_INV |
Edelbrock AVS2 500 cfm Carburetor |
| Description_TRA |
Thunder Series AVS2 Carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000 |
| Description_TRA |
Edelbrock carburetors are not calibrated for or compatible with alcohol, race or E85 pump fuel. The use of alcohol or E85 in your Edelbrock carburetor will damage your carburetor and void your warranty. |
| Description_TRA |
The use of a new fuel filter between the fuel pump and carburetor is required. Failure to do so will void the manufacturer's warranty of the carburetor |
| Description_TRA |
You must use Edelbrock Adapter #2732 when installing a Performer Series carburetor on certain Edelbrock intake manifolds |
| Metering Rod Size |
.070 x .052 |
| Condition |
New |
| Material |
Aluminum |
| Series |
AVS2 |
| Bore Diameter |
Primary Bore 1.44; Secondary Bore 1.6875 |
| Recommended Use |
For Single Carb Applications |
| Choke Type |
Electric |
| Gasket Or Seal Included |
Yes |
| Secondary Jet Diameter |
0.095 |
| EGR Port |
No |
| Finish |
Satin |
| Booster Type |
annular |
| Barrel Quantity |
4 Barrel |
| Spring Force |
5" Hg (Orange) |
| Primary Jet Diameter |
0.095 |
| Maximum Flow Rating |
500 |
| Flange Shape |
Square |
| Body Height |
3.25 |
| RGL |
WARNING: This product can expose you to Zinc, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Main Venturi Diameter |
1.19 |
| Length |
7.0000 |
| Width |
11.0000 |
| Height |
13.0000 |
| Weight |
11.0000 |
