Your Small Town Parts Store With More!
×
Sold out
  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Performance matched parts

  • Nationwide Delivery

    Economy shipping

Centerforce 838264042 TRIAD(R) XDS, Clutch and Flywheel Kit

2 sold in last 8 days
Centerforce
ds_BDPL_838264042
Out of stock
Transmission Clutch and Flywheel Kit
$3,074.18

customers are viewing this product
Centerforce 838264042 TRIAD(R) XDS, Clutch and Flywheel Kit

The Centerforce(R) TRIAD XDS 8.75" triple disc clutch has been developed for vehicles requiring a holding capacity of 500 to 1200 ft/lbs of torque at the crank. The billet pressure plate features our patented centrifugal weight system (where applicable) for superior clamp load over stock and our patented ball bearing actuated pressure plate (where applicable) providing light pedal effort. The solid hub (possible gear noise) disc pack is equipped with Kevlar full facing friction material providing increased holding capacity. TRIAD XDS clutches are equipped with a lightened billet steel flywheel providing low inertia resulting in quicker RPM's. Due to the aggressive nature of this race inspired clutch, vehicles may experience some floater noise and/or chatter during operation. Components are designed, machined and assembled in the USA. TRIAD XDS clutches are match balanced and ready for installation using the included ARP fasteners.

Specifications:

Description_ABR MDA
Description_APS 1997 thru 2015 Chevrolet Camaro and Corvette 8 Cylinders
Description_ASM 1997 thru 2015 Chevrolet Camaro and Corvette 8 Cylinders
Description_DEF Transmission Clutch and Flywheel Kit
Description_DES TRIAD(R) XDS, Clutch and Flywheel Kit
Description_LAB P.Plate, Discs, Floaters, Flywh, P.P.Bolts, A.Tool, Pilot Brgs
Description_INV Centerforce, Full Kits W/Flywheel
Description_FAB 8.750" Diameter;
Description_EXT The Centerforce(R) TRIAD XDS (eXtreme Drive System) 8.75 Inch patented multi-disc clutch offers a smaller and lighter system for quick revving vehicles with engine torque levels from 500 to 1200 ft/lbs.
Description_SLA Clutch and Flywheel Kit, TRIAD, 8.750-IN/222.3-MM, 1-1/8-IN - 26 Spl., Solid; Full face Sintered Metallic Disc, 1100 Ft/Lbs Trq. Cap.
Description_SLD TRIAD, 8.750-IN, 1.125-IN - 26 Spl., 1100 Ft/Lbs
Description_MKT The Centerforce(R) TRIAD XDS 8.75" triple disc clutch has been developed for vehicles requiring a holding capacity of 500 to 1200 ft/lbs of torque at the crank. The billet pressure plate features our patented centrifugal weight system (where applicable) for superior clamp load over stock and our patented ball bearing actuated pressure plate (where applicable) providing light pedal effort. The solid hub (possible gear noise) disc pack is equipped with Kevlar full facing friction material providing increased holding capacity. TRIAD XDS clutches are equipped with a lightened billet steel flywheel providing low inertia resulting in quicker RPM's. Due to the aggressive nature of this race inspired clutch, vehicles may experience some floater noise and/or chatter during operation. Components are designed, machined and assembled in the USA. TRIAD XDS clutches are match balanced and ready for installation using the included ARP fasteners.
Description_SHO Full Kits W/Flywheel
Counterweight Assist No
Disc Type Full face
Input Shaft Diameter 1.125
Disc Material Sintered Metallic
Installed Height 2.890
Mounting Hardware Included Yes
Torque Capacity 1100
Alignment Tool Included Yes
California Proposition 65 WARNING - Includes Nickel - cancer. www.P65Warnings.ca.gov.
Disc Type Sprung Solid Solid
Input Spline Quantity 26
Pilot Bushing Included Yes
Clutch Disc Diameter 8.750
Clutch Disc Diameter 222.3
Crankshaft Bolt Hole Quantity 6
Flywheel Counter Balance Weight 0
Flywheel Crank Bolt Size MM11 x 1.50 x 23
Flywheel Crank Flange Register 2.068
Material Billet Steel Flywheel / Nodular Iron Pressure Plate / Full Face Cerametallic Friction
Out of Package Weight 34.30
Ring Gear O.D. 14.105
Title PN: 838264042 - TRIAD XDS, Clutch and Flywheel Kit
Tooth Quantity 168
Made In The USA Assembled
Length 5.5000
Width 18.0000
Height 18.0000
Weight 38.4500
Read More
Read Less
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×