The Centerforce(R) TRIAD DS 8.75" triple disc clutch has been developed for vehicles requiring a holding capacity of 500 to 1100 ft/lbs of torque at the crank. The billet pressure plate features our patented centrifugal weight system (where applicable) for superior clamp load over stock and our patented ball bearing actuated pressure plate (where applicable) providing light pedal effort. The solid hub (possible gear noise) disc pack is equipped with Kevlar full facing friction material providing increased holding capacity. TRIAD DS clutches are equipped with a lightened billet steel flywheel providing low inertia resulting in quicker RPM's. Vehicles may experience some floater noise during operation. Components are designed, machined and assembled in the USA. TRIAD DS clutches are match balanced and ready for installation using the included ARP fasteners.
Specifications:
| Description_ABR |
MDA |
| Description_APS |
2014 thru 2019 Chevrolet Camaro and Corvette 6.2L |
| Description_ASM |
2014 thru 2019 Chevrolet Camaro and Corvette 6.2L |
| Description_DEF |
Transmission Clutch and Flywheel Kit |
| Description_DES |
TRIAD(R) DS, Clutch and Flywheel Kit |
| Description_INV |
Centerforce, Full Kits W/Flywheel |
| Description_EXT |
The Centerforce(R) TRIAD DS (Drive System) 8.75 Inch patented multi-disc clutch offers a smaller and lighter system for quick revving vehicles with engine torque levels from 500 to 1100 ft/lbs. |
| Description_LAB |
P.Plate, Discs, Floaters, Flywh, P.P.Bolts, A.Tool, Pilot Brgs |
| Description_FAB |
8.75" Diameter; |
| Description_SHO |
Full Kits W/Flywheel |
| Description_MKT |
The Centerforce(R) TRIAD DS 8.75" triple disc clutch has been developed for vehicles requiring a holding capacity of 500 to 1100 ft/lbs of torque at the crank. The billet pressure plate features our patented centrifugal weight system (where applicable) for superior clamp load over stock and our patented ball bearing actuated pressure plate (where applicable) providing light pedal effort. The solid hub (possible gear noise) disc pack is equipped with Kevlar full facing friction material providing increased holding capacity. TRIAD DS clutches are equipped with a lightened billet steel flywheel providing low inertia resulting in quicker RPM's. Vehicles may experience some floater noise during operation. Components are designed, machined and assembled in the USA. TRIAD DS clutches are match balanced and ready for installation using the included ARP fasteners. |
| Description_SLA |
Clutch and Flywheel Kit, TRIAD, 8.75-IN/222-MM, 1-1/8-IN - 26 Spl., Solid Disc, 900 Ft/Lbs Trq. Cap. |
| Description_SLD |
TRIAD, 8.75-IN, 1.125-IN - 26 Spl., 900 Ft/Lbs |
| Crankshaft Bolt Hole Quantity |
8 |
| Replaceable Friction Surface |
N |
| Clutch Disc Diameter |
8.75 |
| Clutch Disc Diameter |
222 |
| Material |
Cast Iron Pressure Plate / Full Face Organic Friction |
| Title |
PN: 836264077 - TRIAD DS, Clutch and Flywheel Kit |
| Tooth Quantity |
168 |
| Flywheel Crank Bolt Size |
MM11 x 1.50 x 23 |
| California Proposition 65 |
WARNING - Includes Nickel - cancer. www.P65Warnings.ca.gov. |
| Counterweight Assist |
No |
| Disc Type Sprung Solid |
Solid |
| Input Shaft Diameter |
1.125 |
| Input Spline Quantity |
26 |
| Mounting Hardware Included |
Yes |
| Pilot Bushing Included |
Yes |
| Ring Gear O.D. |
14.105 |
| Torque Capacity |
900 |
| Made In The USA |
Assembled |
| Alignment Tool Included |
Yes |
| Length |
5.5000 |
| Width |
18.0000 |
| Height |
18.0000 |
| Weight |
49.6000 |
