The Centerforce(R) DYAD XDS 8.75" twin disc clutch has been developed for vehicles requiring a holding capacity of 400 to 800 ft/lbs of torque at the crank. The billet pressure plate features our patented centrifugal weight system (where applicable) for superior clamp load over stock and our patented ball bearing actuated pressure plate (where applicable) providing light pedal effort. The disc pack is equipped with metallic friction material providing increased holding capacity and is available in either sprung or solid hub (possible gear noise) depending on the application. DYAD XDS clutches are equipped with a lightened billet steel flywheel providing low inertia resulting in quicker RPM's. Due to the aggressive nature of this race inspired clutch, vehicles may experience some floater noise and/or chatter during operation. Components are designed, machined and assembled in the USA. DYAD XDS clutches are match balanced and ready for installation using the included ARP fasteners.
Specifications:
| Description_ABR |
MDA |
| Description_APS |
2016 thru 2017 Ford Focus RS 2.3L |
| Description_ASM |
2016 thru 2017 Ford Focus RS 2.3L |
| Description_DES |
DYAD(R) XDS 8.75, Clutch and Flywheel Kit |
| Description_DEF |
Transmission Clutch and Flywheel Kit |
| Description_FAB |
8.75" Diameter; |
| Description_EXT |
The Centerforce(R) DYAD(R) XDS (eXtreme Drive System) 8.75 Inch patented multi-disc clutch offers smooth engagement, light pedal, and high-end holding capacity for engine torque levels from 400 to 800 ft /lbs. |
| Description_INV |
Centerforce, Full Kits W/Flywheel |
| Description_SHO |
Full Kits W/Flywheel |
| Description_MKT |
The Centerforce(R) DYAD XDS 8.75" twin disc clutch has been developed for vehicles requiring a holding capacity of 400 to 800 ft/lbs of torque at the crank. The billet pressure plate features our patented centrifugal weight system (where applicable) for superior clamp load over stock and our patented ball bearing actuated pressure plate (where applicable) providing light pedal effort. The disc pack is equipped with metallic friction material providing increased holding capacity and is available in either sprung or solid hub (possible gear noise) depending on the application. DYAD XDS clutches are equipped with a lightened billet steel flywheel providing low inertia resulting in quicker RPM's. Due to the aggressive nature of this race inspired clutch, vehicles may experience some floater noise and/or chatter during operation. Components are designed, machined and assembled in the USA. DYAD XDS clutches are match balanced and ready for installation using the included ARP fasteners. |
| Description_SLA |
Clutch and Flywheel Kit, DYAD XDS, 8.75-IN/222.3-MM, 1-IN - 23 Spl., Solid Full face Sintered Metallic Disc, 400-800 Ft/Lbs Trq. Cap. |
| Description_SLD |
DYAD XDS, 8.75-IN, 1-IN - 23 Spl., 400-800 Ft/Lbs |
| Description_LAB |
P.Plate, Disc Pack w Floater, Flywh, P.P.Bolts |
| Disc Type |
Full face |
| Mounting Hardware Included |
Yes |
| Out of Package Weight |
29.85 |
| Disc Type Sprung Solid |
Solid |
| Disc Material |
Sintered Metallic |
| Input Shaft Diameter |
1 |
| California Proposition 65 |
WARNING - Includes Nickel - cancer. www.P65Warnings.ca.gov. |
| Input Spline Quantity |
23 |
| Torque Capacity |
400-800 |
| Clutch Disc Diameter |
8.75 |
| Clutch Disc Diameter |
222.3 |
| Counterweight Assist |
No |
| Crankshaft Bolt Hole Quantity |
6 |
| Material |
Cerametallic |
| Title |
PN: 818231537 - DYAD XDS 8.75, Clutch and Flywheel Kit |
| Made In The USA |
Assembled |
| Length |
5.5000 |
| Width |
18.0000 |
| Height |
18.0000 |
| Weight |
37.0000 |
