| Description_APS |
1998 thru 2002 Chevrolet Camaro Z28 5.7L |
| Description_ABR |
MDA |
| Description_ASM |
1998 thru 2002 Chevrolet Camaro Z28 5.7L |
| Description_DES |
DYAD(R) XDS 8.75, Clutch and Flywheel Kit |
| Description_DEF |
Transmission Clutch and Flywheel Kit |
| Description_INV |
Centerforce, Full Kits W/Flywheel |
| Description_EXT |
The Centerforce(R) DYAD(R) XDS (eXtreme Drive System) 8.75 Inch patented multi-disc clutch offers smooth engagement, light pedal, and high-end holding capacity for engine torque levels from 400 to 800 ft /lbs. |
| Description_FAB |
8.75" Diameter; |
| Description_MKT |
The Centerforce(R) DYAD XDS 8.75" twin disc clutch has been developed for vehicles requiring a holding capacity of 400 to 800 ft/lbs of torque at the crank. The billet pressure plate features our patented centrifugal weight system (where applicable) for superior clamp load over stock and our patented ball bearing actuated pressure plate (where applicable) providing light pedal effort. The disc pack is equipped with metallic friction material providing increased holding capacity and is available in either sprung or solid hub (possible gear noise) depending on the application. DYAD XDS clutches are equipped with a lightened billet steel flywheel providing low inertia resulting in quicker RPM's. Due to the aggressive nature of this race inspired clutch, vehicles may experience some floater noise and/or chatter during operation. Components are designed, machined and assembled in the USA. DYAD XDS clutches are match balanced and ready for installation using the included ARP fasteners. |
| Description_SHO |
Full Kits W/Flywheel |
| Description_SLD |
DYAD XDS, 8.75-IN, 1.125-IN - 26 Spl., 750 Ft/Lbs |
| Description_SLA |
Clutch and Flywheel Kit, DYAD XDS, 8.75-IN/222.3-MM, 1-1/8-IN - 26 Spl., Sprung Full face Sintered Metallic Disc, 750 Ft/Lbs Trq. Cap. |
| Description_LAB |
P.Plate, Discs, Floater, Flywh, P.P.Bolts, Shim, A.Tool, Pilot Be |
| Counterweight Assist |
No |
| Title |
PN: 814262842 - DYAD XDS 8.75, Clutch and Flywheel Kit |
| California Proposition 65 |
WARNING - Includes Nickel - cancer. www.P65Warnings.ca.gov. |
| Material |
Billet Steel Flywheel / Nodular Iron Pressure Plate / Full Face Cerametallic Friction |
| Tooth Quantity |
168 |
| Torque Capacity |
750 |
| Disc Type Sprung Solid |
Sprung |
| Flywheel Counter Balance Weight |
0 |
| Flywheel Crank Flange Register |
2.068 |
| Ring Gear O.D. |
14.105 |
| Made In The USA |
Assembled |
| Alignment Tool Included |
Yes |
| Clutch Disc Diameter |
8.75 |
| Clutch Disc Diameter |
222.3 |
| Crankshaft Bolt Hole Quantity |
6 |
| Disc Material |
Sintered Metallic |
| Disc Type |
Full face |
| Flywheel Crank Bolt Size |
MM11 x 1.50 x 23 |
| Input Shaft Diameter |
1.125 |
| Input Spline Quantity |
26 |
| Installed Height |
2.375 |
| Mounting Hardware Included |
Yes |
| Pilot Bushing Included |
Yes |
| Length |
5.5000 |
| Width |
18.0000 |
| Height |
18.0000 |
| Weight |
35.1500 |
