If more than two joints are used in a steering system, a support bearing must be used to prevent "looping" and binding. Use of a vibration reducer and two u-joints will also call for a support bearing to be used. A system with a double u-joint and a single u-joint has three flex points and will require a support bearing. Support bearings will work with all 3/4" splined or Double D steering shafts. All billet supports accommodate a 3/4" shaft. Our standard supports are 2-1/2" tall with two 5/16"-18 threaded holes in the end for mounting and are available in steel, aluminum, polished aluminum, stainless steel, and polished stainless steel. The 6" cut and weld billet support is available only in steel and can be cut at any angle for a perfect fit.
Specifications:
| Description_ASC |
Steering Shaft Support Bearing. |
| Description_DEF |
Steering Shaft Support Bearing |
| Description_DES |
Steering Shaft Support; Billet Steel; 3/4in. ID |
| Description_FAB |
Supports 3/4" round and3/4" DD Steering shafts. Prevents center joint from looping in a three-joint steering system. Made in the USA. |
| Description_EXT |
Steering shaft support bearing. Billet steel. Tapped to receive two 5/16in.-18 bolts. Supports all 3/4in. splined and Double-D steering shaft. |
| Description_INV |
Borgeson Steering Shaft Support |
| Description_KEY |
Borgeson Steering Shaft Support Bearing |
| Description_SHO |
Steering Shaft Suppo |
| Description_MKT |
If more than two joints are used in a steering system, a support bearing must be used to prevent "looping" and binding. Use of a vibration reducer and two u-joints will also call for a support bearing to be used. A system with a double u-joint and a single u-joint has three flex points and will require a support bearing. Support bearings will work with all 3/4" splined or Double D steering shafts. All billet supports accommodate a 3/4" shaft. Our standard supports are 2-1/2" tall with two 5/16"-18 threaded holes in the end for mounting and are available in steel, aluminum, polished aluminum, stainless steel, and polished stainless steel. The 6" cut and weld billet support is available only in steel and can be cut at any angle for a perfect fit. |
| California Proposition 65 |
WARNING: This product can expose you to chemicals including Nickel and Chromium (hexavalent compounds), which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information visit: www.P65Warnings.ca.gov |
| Title |
Borgeson - Steering Shaft Support - P/N: 670000 - Steering shaft support bearing. Billet steel. Tapped to receive two 5/16 in.-18 bolts. Supports all 3/4 in. splined and Double-D steering shaft. |
| Length |
5.7500 |
| Width |
3.7500 |
| Height |
1.7500 |
| Weight |
0.7400 |
