Available with single or dual injector provisions and a burst panel flange, the LS3 Lo-Ram intake manifold is designed for boosted combinations with hood clearance in mind. The Holley LS3 Ultra Lo-Ram intake manifold kits are designed for GM LS Gen III and IV engines equipped with GM LS3/L92 cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7000-8000 rpm depending on the application. The front entry plenum flange has a 105 mm opening to work with throttle body part number 112-581 or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front entry configuration. The LS3 Lo-Ram is constructed to provide a very low profile modular intake manifold suitable for fabrication of special throttle body adapters or inlet ducts for custom installations. Available with single or dual injector provisions and a burst panel flange options. The fuel rail kits come with two sets of brackets. A set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors.
Specifications:
| Description_ASC |
Lo-Ram Base Intake Manifold Plenum Top Mounting Flange Height - 7.00
Plenum Configuration w/105mm Throttle Body Adapter - 5.67" |
| Description_DEF |
Engine Intake Manifold |
| Description_EXT |
Holley EFI Ultra Lo-Ram Intake Manifold Kit; Upper; LS3; Dual Injector Front Feed; w/Burst Silver Cast Satin Finish; 6.86 in. Height w/Throttle Body Adapter; |
| Description_DES |
Holley Ultra Lo-Ram Manifold Kit Dual Injector- Satin - GM LS3/L92 |
| Description_FAB |
Designed for GM LS Gen III and IV engines equipped with GM LS3/L92 cylinder headsΓÇó |
| Description_FAB |
Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7000-8000 rpm depending on the application. |
| Description_FAB |
Low height to fit under a stock or mildly modified hood in the front- configuration |
| Description_FAB |
Front entry plenum flange allows design & fabrication of special throttle body adapters or inlet ducts for custom installations |
| Description_FAB |
Clears C6 Corvette cowls and hoods without modification |
| Description_FAB |
Available with single or dual injector provisions and a burst panel flange. |
| Description_FAB |
High volume fuel rails for eight and sixteen injector configurations. Mounting hardware included with 3/4-16 O-ring ports (8 AN) |
| Description_FAB |
Billet options for the top and throttle body adapters are available seperately. |
| Description_INV |
LS3 LO-RAM MANIFOLD KIT, SATIN |
| Description_MKT |
Available with single or dual injector provisions and a burst panel flange, the LS3 Lo-Ram intake manifold is designed for boosted combinations with hood clearance in mind. The Holley LS3 Ultra Lo-Ram intake manifold kits are designed for GM LS Gen III and IV engines equipped with GM LS3/L92 cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications with peak power at 7000-8000 rpm depending on the application. The front entry plenum flange has a 105 mm opening to work with throttle body part number 112-581 or similar models. The base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood in the front entry configuration. The LS3 Lo-Ram is constructed to provide a very low profile modular intake manifold suitable for fabrication of special throttle body adapters or inlet ducts for custom installations. Available with single or dual injector provisions and a burst panel flange options. The fuel rail kits come with two sets of brackets. A set for long (usually standard length) fuel injectors and a set for short (such as Pico, or LS7) fuel injectors. |
| Description_SHO |
Intake Manifold |
| Engine |
GM LS3/L92 |
| Front Height |
6.86" height with throttle body adapter |
| Inlet Location |
Front |
| Emission |
N/A |
| Position |
Upper |
| Usage |
Street/Strip |
| Cylinder Head Type |
LS3/L92 |
| Brand |
Holley EFI |
| Emission Code |
3 |
| Flange Style |
EFI |
| Product Type |
Intake Manifold |
| Clearance Category |
Air and Fuel Delivery |
| Sale Category |
Air and Fuel Delivery |
| Number of Carbs |
None; For Fuel Injection |
| Engine Make/Size |
Chevy LS3 |
| RPM Range |
7000-8000 |
| WARNING CA Proposition 65 |
No |
| Construction |
Cast |
| Finish |
Silver |
| Fuel System Type |
EFI |
| Injector Quantity |
Dual |
| Manifold Type |
Ultra Lo-Ram |
| Recommended Use |
Forced Induction |
| RPM Power Band |
3500-8000 RPM |
| Warranty |
Limited 90 Day |
| Color |
Silver |
| Discount Percentage |
5-25% |
| Length |
15.2000 |
| Width |
15.2000 |
| Height |
20.4000 |
| Weight |
26.8000 |
