Holley and Sniper will help you to complete your EFI swap with our new EFI Conversion Fuel Tanks. Each tank is a direct fit for your application-no modifications necessary. The kit includes the tank, a 400 lph fuel pump, internal baffling and a fuel level sending unit. The tank is powder coated for corrosion resistance and great looks. These tank kits are a complete solution for your EFI project!***Steel filler neck is not included. You must use your existing stock filler neck or purchase one through restoration suppliers.***This kit includes a fuel gauge sender for use with FACTORY FUEL GAUGE and wiring. If you are using an aftermarket gauge, you will also need a sending unit for that gauge ohm range. Supports up to 750 EFI (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Size is: 38 in. x 15-3/4 in. x 11-3/4 in.
Specifications:
| Description_DEF |
Fuel Tank and Pump Assembly Combination |
| Description_DES |
Sniper EFI Fuel Tank System |
| Description_EXT |
Sniper EFI Fuel Tank System; Incl. Tank/Pump/Sender/Straps; 18 Gallon Capacity; Free Flow 400 LPH; 0-30 Ohms; Coated Steel; Silver Powdercoat; |
| Description_INV |
1963-67 CORVETTE EFI TANK KIT |
| Description_FAB |
Supports up to 750 EFI (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) |
| Description_FAB |
Powdercoated Silver For Total Corrosion Protection |
| Description_FAB |
400 lph Fuel Pump w/Hanger Assy Gives You The Fuel You Need |
| Description_FAB |
Sender 1/4 in. NPT Supply/Return Line Ports For Easy Connection |
| Description_FAB |
Fuel Level Sender Incl. w/Correct Ohm Range For Your Fact. Gauges |
| Description_FAB |
Fuel Pump/Sender Are Recessed in The Tank For Easy Install |
| Description_FAB |
EFI Style Tank Baffling Incl. 4.3 Liter Internal Fuel Tray |
| Description_FAB |
Fits and Looks Like an OE Tank When Installed |
| Description_FAB |
Complete Bolt On Solution For Your EFI Conversion |
| Description_FAB |
38 in. x 15 3/4 in. x 11 3/4 in. |
| Description_FAB |
Steel Filler Neck Not Incl. Use Existing Stock Neck |
| Description_MKT |
Holley and Sniper will help you to complete your EFI swap with our new EFI Conversion Fuel Tanks. Each tank is a direct fit for your application-no modifications necessary. The kit includes the tank, a 400 lph fuel pump, internal baffling and a fuel level sending unit. The tank is powder coated for corrosion resistance and great looks. These tank kits are a complete solution for your EFI project!***Steel filler neck is not included. You must use your existing stock filler neck or purchase one through restoration suppliers.***This kit includes a fuel gauge sender for use with FACTORY FUEL GAUGE and wiring. If you are using an aftermarket gauge, you will also need a sending unit for that gauge ohm range. Supports up to 750 EFI (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw) Size is: 38 in. x 15-3/4 in. x 11-3/4 in. |
| Description_SHO |
FuelTankandPumpAssy |
| Gallon Capacity |
18 |
| Finish |
Powder Coat |
| Fuel Sending Unit |
0-30 Ohms |
| Drain Plug Included |
No |
| Straps Included |
Yes |
| Fully Open |
400 |
| Color |
Silver |
| WARNING CA Proposition 65 |
Yes |
| Fuel System Type |
Gasoline |
| WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Length |
14.1000 |
| Width |
17.8000 |
| Height |
45.8000 |
| Weight |
28.7500 |
