The Off-Road Truck Avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off-road environment. The Truck Avenger features a quick change vacuum secondary for easy fine tuning; four vacuum ports for all necessary vacuum accessories; factory preset electric choke for easy start ups; and a built-in fuel filter. The 470 CFM Off-Road Truck Avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines.
Specifications:
| Description_ASC |
Notice - Due to the natural color variations of the dichromate plating process, the plating color may vary from casting to casting (within a carburetor) and from carburetor to carburetor. This is considered normal and is not a cosmetic defect. If you desire a carburetor with no color variation, please shop our black and shiny finish carburetors. |
| Description_DEF |
Carburetor |
| Description_EXT |
Off-Road Truck Avenger Carburetor; 4bbl.; 470cfm; Model 4150; Electric Choke; Gasoline; Vacuum Secondary; Single Fuel Inlet; Gold Dichromate Finish; |
| Description_DES |
470 CFM Holley Off-Road Truck Avenger Carburetor |
| Description_INV |
470 CFM 4 BBL TRUCK AVENGER |
| Description_MKT |
The Off-Road Truck Avenger is designed specifically for off-road applications. The unique fuel metering block eliminates fuel spillover through the boosters at extreme angles allowing for 40 degree climbing, 30 degree side hill maneuvers and nose-down descents to avoid hesitations, stalling and flooding typically associated with carbs in an off-road environment. The Truck Avenger features a quick change vacuum secondary for easy fine tuning; four vacuum ports for all necessary vacuum accessories; factory preset electric choke for easy start ups; and a built-in fuel filter. The 470 CFM Off-Road Truck Avenger is the perfect carburetor for 4 cylinder, V-6, and inline 6 cylinder engines. |
| Description_FAB |
Gold Dichromate finish for extreme off road environments |
| Description_FAB |
Single feed fuel inlet for ease of installation |
| Description_FAB |
Optimized off-road calibration that works out-of-the-box |
| Description_FAB |
Factory preset electric choke for easy startups |
| Description_FAB |
Vacuum secondaries allow use on a wide variety of vehicles. Quick Change vacuum housing cap allows you to tune for performance or fuel economy (springs included) |
| Description_FAB |
Compatible with GM, Chrysler, and Ford A/T kickdown linkage. Additional parts may be required. |
| Description_FAB |
One piece off-road vent tube eliminates fuel spillover during extreme maneuvers |
| Description_FAB |
Intended for off-road/off-angle use. Unique metering block designed for flood free operation up to 40┬║ while climbing and 30┬║ during side hill maneuvers & ΓÇ£nose down" decents |
| Description_FAB |
Limited lifetime warranty - Guaranteed to be free from defects in material and workmanship for the life of the product! |
| Description_FAB |
100% wet-flow tested by Holley technicians to assure it arrives ready to run! |
| Description_SHO |
Carburetor |
| Barrels |
4 |
| Choke |
Electric |
| Usage |
Street/Strip |
| Fuel Type |
Gasoline |
| Emission |
Without EGR |
| Secondary Type |
Vacuum |
| Product Type |
Carburetor |
| Warranty |
Limited Lifetime Warranty |
| Finish |
Dichromate Gold |
| WARNING CA Proposition 65 |
Yes |
| Booster |
Straight |
| Emission Code |
3 |
| Model |
4150 |
| WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Carburetor Type |
4150 |
| Material |
Zinc |
| Fuel Inlet |
Single |
| Flange |
Square Bore |
| Condition |
New |
| Warning |
California Proposition 65 |
| Barrel |
Four |
| Type |
Automotive |
| Secondary Main Jet |
57 |
| Primary Main Jet |
57 |
| CFM |
470 |
| Brand |
Holley |
| Carburetor Use |
Off-Road |
| Fuel |
Gasoline |
| Marine Use |
No |
| Primary Pump Nozzle Size |
35 |
| Secondaries |
Vacuum |
| Throttle Bore |
1.500 inch |
| Vacuum Ports |
1 timed (spark) port, 2 full, and 1 PCV port |
| Clearance Category |
Carburetors and Components |
| Primary Power Valve |
2.5 |
| Vacuum Port Quantity |
1 timed (spark); 2 full; 1 PCV |
| Supercharged Application |
No |
| Booster Type |
Straight |
| Length |
8.0000 |
| Width |
11.0000 |
| Height |
12.0000 |
| Weight |
8.0000 |
