All Holley Marine Carburetors are designed to meet Coast Guard specifications. A marine carburetors fuel metering system is calibrated to compensate for unique engine loads found on boats. The J-style vent tubes direct fuel/fumes back into the carburetor for safe operation while on rough waters. The Holley 0-80443 Marine carburetor is designed with a universal calibration good for large cubic inch marine engines where a mechanical secondary 4150 model 4BBL with electric choke is required
Specifications:
| Description_ASC |
Notice - Due to the natural color variations of the dichromate plating process, the plating color may vary from casting to casting (within a carburetor) and from carburetor to carburetor. This is considered normal and is not a cosmetic defect. If you desire a carburetor with no color variation, please shop our black and shiny finish carburetors. |
| Description_DES |
850 CFM Marine Carburetor-Aluminum |
| Description_DEF |
Carburetor |
| Description_EXT |
Marine Carburetor; 4 bbl; 850 cfm; Model 4150; Mech. Secondary; Electric Choke; Gasoline; Dual Fuel Inlet; Universal Calibration; Gold Dichromate Finish; |
| Description_FAB |
Gold Dichromate finish for corrosion resistance and classic Holley looks |
| Description_FAB |
Universal Marine Calibration |
| Description_FAB |
Factory preset electric choke for easy startups |
| Description_FAB |
Mechanical secondaries for awesome performance |
| Description_FAB |
30cc primary and 50cc secondary accelerator pumps for additional fuel under initial acceleration |
| Description_FAB |
Dual feed fuel inlets for constant high volume fuel delivery |
| Description_FAB |
J-Style Vent Tubes |
| Description_FAB |
Meets Coast Guard Specifications |
| Description_FAB |
Power valve blow-out protection |
| Description_FAB |
100% wet-flow tested by Holley technicians to assure it arrives ready to run! |
| Description_SHO |
Carburetor |
| Description_INV |
MDL 4150 850CFM D/P MARINE ALUM |
| Description_MKT |
All Holley Marine Carburetors are designed to meet Coast Guard specifications. A marine carburetors fuel metering system is calibrated to compensate for unique engine loads found on boats. The J-style vent tubes direct fuel/fumes back into the carburetor for safe operation while on rough waters. The Holley 0-80443 Marine carburetor is designed with a universal calibration good for large cubic inch marine engines where a mechanical secondary 4150 model 4BBL with electric choke is required |
| Secondary Type |
Mechanical |
| Emission |
Without EGR |
| Fuel Type |
Gasoline |
| WARNING CA Proposition 65 |
Yes |
| Product Type |
Marine Carburetor |
| Flange |
Square Bore |
| Booster |
Down Leg |
| Throttle Bore |
1.750 inch |
| Warranty |
Limited 90 Day |
| Carburetor Type |
4150 |
| Barrel |
Four |
| Secondary Pump Nozzle Size |
31 |
| Finish |
Gold Dichromate |
| Marine Use |
Yes |
| Material |
Aluminium |
| Model |
4150 |
| Warning |
California Proposition 65 |
| Primary Main Jet |
88 |
| Booster Type |
Down Leg |
| Type |
Marine |
| WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| CFM |
850 |
| Fuel Inlet |
Dual |
| Secondary Main Jet |
96 |
| Carburetor Use |
Marine |
| Condition |
New |
| Primary Pump Nozzle Size |
31 |
| Secondaries |
Mechanical |
| Choke |
Electric |
| Primary Power Valve |
6.5 |
| Usage |
Marine |
| Supercharged Application |
No |
| Marine Engine Size |
Universal |
| Barrels |
4 |
| Brand |
Holley |
| Emission Code |
3 |
| Fuel |
Gasoline |
| Length |
8.0000 |
| Width |
11.0000 |
| Height |
12.0000 |
| Weight |
7.0000 |
