Our factory assembled hoses are made from the same SPEED-FLEX stainless steel braid protected hose of extruded PTFE that is the world standard of the racing industry for flexible brake, clutch and instrument hoses. Hoses are assembled with Earl''s SPEED-FLEX crimp or swaged permanently installed hose ends. Each hose is pressure tested to 4,000 psi.
Specifications:
| Description_ASC |
We have independent test lab reports on file showing that prototype assemblies exceeded D.O.T. recommendations in all categories. The only continuing test program however, is a 4000 P.S.I. hydrostatic pressure test of every hose assembly that we make. We do not claim that any individual hose assembly is certifiable to D.O.T. standards, and we therefore must advise you that they are sold for off-road applications only. We make no claim of usability or suitability for highway or road use. PTFE brake hoses must be installed by an experienced professional mechanic. After installation each hose must be clean and free flowing. There must be no possibility that the installed hose assemblies can be stretched, crimped, or kinked under any conditions of wheel travel and steering angle. As with any hose installation, periodic inspection of hose condition is essential. |
| Description_DEF |
Fuel Hose |
| Description_DES |
Earl's Speed-Flex Hyperfirm (R) Pre-Made Hose |
| Description_MKT |
Our factory assembled hoses are made from the same SPEED-FLEX stainless steel braid protected hose of extruded PTFE that is the world standard of the racing industry for flexible brake, clutch and instrument hoses. Hoses are assembled with Earl''s SPEED-FLEX crimp or swaged permanently installed hose ends. Each hose is pressure tested to 4,000 psi. |
| Description_FAB |
Use Of Extruded Teflon (TM) Coating |
| Description_FAB |
Standard Of Racing Industry |
| Description_FAB |
For Flexible And Firmer Brake |
| Description_FAB |
For Flexible Clutch |
| Description_FAB |
For Instrument Hoses |
| Description_FAB |
Pressure Tested To 4000 psi |
| Description_INV |
LTS -4 1/8 NPT MALE-MALE 22 IN HOSE |
| Description_EXT |
Speed-Flex (TM) Line; -04AN 1/8 in. NPT Male Both Ends; Hose Size -04AN; Length 22 in.; |
| Description_SHO |
Hose |
| Length |
22.000 in. |
| Hose Size |
4AN |
| Wall Thickness |
0.430 in. |
| Fluid Type |
Automatic Transmission Fluid |
| Hose Outer Material |
Stainless Steel Braided |
| Material |
Braided Stainless Steel |
| Color |
Silver |
| Inside Diameter |
N/A |
| Outside Diameter |
N/A |
| WARNING CA Proposition 65 |
Yes |
| Product Length |
22.000 in. |
| Size |
4AN |
| Submersible in Fuel |
Yes |
| WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Length |
1.2000 |
| Width |
3.3500 |
| Height |
3.5000 |
| Weight |
0.2100 |
