Our factory assembled hoses are made from the same SPEED-FLEX stainless steel braid protected hose of extruded PTFE that is the world standard of the racing industry for flexible brake, clutch and instrument hoses. Hoses are assembled with Earl''s SPEED-FLEX crimp or swaged permanently installed hose ends. Each hose is pressure tested to 4,000 psi.
Specifications:
Description_ASC |
We have independent test lab reports on file showing that prototype assemblies exceeded D.O.T. recommendations in all categories. The only continuing test program however, is a 4000 P.S.I. hydrostatic pressure test of every hose assembly that we make. We do not claim that any individual hose assembly is certifiable to D.O.T. standards, and we therefore must advise you that they are sold for off-road applications only. We make no claim of usability or suitability for highway or road use. PTFE brake hoses must be installed by an experienced professional mechanic. After installation each hose must be clean and free flowing. There must be no possibility that the installed hose assemblies can be stretched, crimped, or kinked under any conditions of wheel travel and steering angle. As with any hose installation, periodic inspection of hose condition is essential. |
Description_DEF |
Fuel Hose |
Description_DES |
Earl's Speed-Flex Hyperfirm (R) Pre-Made Hose |
Description_FAB |
Use Of Extruded Teflon (TM) Coating |
Description_FAB |
Stainless Steel Outer Braid |
Description_FAB |
Solves Pedal Travel Problem |
Description_FAB |
Increased Brake Pedal Firmness |
Description_FAB |
Modulate Brakes Efficiently |
Description_FAB |
Improved Abrasion Resistance |
Description_FAB |
Increased Temp. Capacity |
Description_FAB |
Impervious To Any Fuel Blend |
Description_INV |
-3 10MMX1MALE TO 10MMX1MALE |
Description_EXT |
Speed-Flex Line 10mm x 1.0 Inverted Flare Male on Both Ends, Hose Size 3 Length 11 In. |
Description_MKT |
Our factory assembled hoses are made from the same SPEED-FLEX stainless steel braid protected hose of extruded PTFE that is the world standard of the racing industry for flexible brake, clutch and instrument hoses. Hoses are assembled with Earl''s SPEED-FLEX crimp or swaged permanently installed hose ends. Each hose is pressure tested to 4,000 psi. |
Description_SHO |
Hose |
Color |
Stainless Steel |
Material |
Stainless Steel |
Inside Diameter |
N/A |
WARNING CA Proposition 65 |
Yes |
WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Hose Size |
3AN |
Length |
11.000 in. |
Outside Diameter |
N/A |
Product Length |
11.000 in. |
Size |
-3 AN |
Submersible in Fuel |
Yes |
Fluid Type |
Automatic Transmission Fluid |
Hose Outer Material |
Stainless Steel Braided |
Wall Thickness |
0.430 in. |
Length |
1.0500 |
Width |
3.4500 |
Height |
6.0500 |
Weight |
0.1450 |