The K&N 69-8606TB Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Scion XA and Toyota Yaris models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-8606TB cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing delivering high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Specifications:
| Description_DEF |
Engine Cold Air Intake Performance Kit |
| Description_DES |
Performance Air Intake System |
| Description_EXT |
K&N's easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a blue powder coat finish. |
| Description_SHO |
Air Intake System |
| Description_MKT |
The K&N 69-8606TB Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Scion XA and Toyota Yaris models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-8606TB cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing delivering high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake. |
| Description_INV |
Performance Air Intake System |
| Couplers Included |
1 |
| Air Filter Material |
Cotton Gauze |
| Oil Included |
Yes |
| Intake Pipe Color / Finish |
Blue |
| Intake Pipe Material |
Aluminum |
| Air Filter Outlet Shape |
Round |
| Air Box Included |
No |
| Mounting Hardware Included |
Yes |
| Prop 65 - Short Label |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
| Product Style |
69 Series Typhoon Kits |
| Clamp Style |
Regular |
| Estimated Horsepower Gain |
4.36 HP @ 4925 RPM |
| Air Filter Washable |
Yes |
| Air Filter Color |
Red |
| Prop 65 Yes/No |
Yes |
| TUV Approved (Europe) |
No |
| Package Type |
Box |
| Package Material |
Paperboard |
| Clamp Color/Finish |
Natural |
| Clamp Material |
Stainless Steel |
| Prop 65 Warning Label |
https://www.knfilters.com/images/l/prop65.jpg |
| Coupler Color/Finish |
Black |
| Mass Air Flow Sensor Adapter Included |
Yes |
| CARB EO Number |
D-269-38 |
| Weight |
6 lb (2.7 kg) |
| Warranty |
No-Hassle Lifetime Limited |
| Replacement Filter |
RU-4950 |
| Horse Power Increase |
4 HP |
| Intake Pipe Ports |
All intake tube ports needed for the specified applications are included |
| System Type |
Cold-Air Intake System |
| Prop 65 (C, R or CR) |
CR |
| RPM |
4925 |
| Street Legal In All US States |
See Vehicle Applications |
| Title |
K&N 69-8606TB Performance Air Intake System |
| Clamps Included |
4 |
| Length |
9.0000 |
| Width |
15.0000 |
| Height |
18.0000 |
| Weight |
6.0000 |
