The K&N 69-8605TS Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Toyota Scion XB models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-8605TS cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing cooler outside air through a free-flowing aluminum intake tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a black water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Specifications:
| Description_DEF |
Engine Cold Air Intake Performance Kit |
| Description_DES |
Performance Air Intake System |
| Description_EXT |
K&N's easy-to-install Typhoon cold air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a silver powder coat finish. |
| Description_INV |
Performance Air Intake System |
| Description_SHO |
Air Intake System |
| Description_MKT |
The K&N 69-8605TS Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Toyota Scion XB models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-8605TS cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing cooler outside air through a free-flowing aluminum intake tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a black water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake. |
| Horse Power Increase |
8 HP |
| Clamp Color/Finish |
Natural |
| Warranty |
No-Hassle Lifetime Limited |
| Street Legal In All US States |
See Vehicle Applications |
| Weight |
6 lb (2.7 kg) |
| RPM |
5450 |
| CARB EO Number |
D-269-30 |
| Air Filter Color |
Red |
| Package Material |
Paperboard |
| Prop 65 - Short Label |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
| Prop 65 (C, R or CR) |
CR |
| Replacement Filter |
RU-4860 |
| Prop 65 Yes/No |
Yes |
| Air Filter Washable |
Yes |
| Mounting Hardware Included |
Yes |
| Air Filter Outlet Shape |
Round |
| System Type |
Cold-Air Intake System |
| Package Type |
Box |
| Couplers Included |
1 |
| Clamps Included |
3 |
| Clamp Material |
Stainless Steel |
| Intake Pipe Color / Finish |
Silver |
| Coupler Color/Finish |
Black |
| Product Style |
69 Series Typhoon Kits |
| Prop 65 Warning Label |
https://www.knfilters.com/images/l/prop65.jpg |
| Intake Pipe Ports |
All intake tube ports needed for the specified applications are included |
| TUV Approved (Europe) |
No |
| Intake Pipe Material |
Aluminum |
| Clamp Style |
Regular |
| Air Box Included |
No |
| Mass Air Flow Sensor Adapter Included |
Yes |
| Title |
K&N 69-8605TS Performance Air Intake System |
| Estimated Horsepower Gain |
7.99 HP @ 5450 RPM |
| Oil Included |
Yes |
| Air Filter Material |
Cotton Gauze |
| Length |
9.0000 |
| Width |
15.0000 |
| Height |
18.0000 |
| Weight |
6.0000 |
