The K&N 69-6501TB Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mitsubishi Eclipse models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-6501TB cold-air intake consists of a K&N high-flow air filter that mounts between the driver side wheel well and from bumper. Cooler outside air is directed through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California or other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the applications and specific CARB status for each vehicle and air intake.
Specifications:
| Description_DEF |
Engine Cold Air Intake Performance Kit |
| Description_DES |
Performance Air Intake System |
| Description_EXT |
K&N's easy-to-install Typhoon cold air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a blue powder coat finish. |
| Description_SHO |
Air Intake System |
| Description_INV |
Performance Air Intake System |
| Description_MKT |
The K&N 69-6501TB Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mitsubishi Eclipse models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-6501TB cold-air intake consists of a K&N high-flow air filter that mounts between the driver side wheel well and from bumper. Cooler outside air is directed through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California or other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the applications and specific CARB status for each vehicle and air intake. |
| Package Material |
Corrugated |
| CARB EO Number |
D-269-32 |
| Air Box Included |
No |
| Prop 65 (C, R or CR) |
CR |
| Horse Power Increase |
7 HP |
| Prop 65 - Short Label |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
| Clamps Included |
7 |
| Air Filter Outlet Shape |
Round |
| Prop 65 Yes/No |
Yes |
| Weight |
8.2 lb (3.7 kg) |
| Air Filter Washable |
Yes |
| Mass Air Flow Sensor Adapter Included |
No |
| System Type |
Complete Cold-Air Intake System |
| Mounting Hardware Included |
Yes |
| Intake Pipe Material |
Aluminum |
| Clamp Color/Finish |
Natural |
| Intake Pipe Ports |
All intake tube ports needed for the specified applications are included |
| Air Filter Color |
Red |
| Clamp Material |
Stainless Steel |
| Prop 65 Warning Label |
https://www.knfilters.com/images/l/prop65.jpg |
| Coupler Color/Finish |
Black |
| Intake Pipe Color / Finish |
Blue |
| Product Style |
69 Series Typhoon Kits |
| Package Type |
Box |
| Street Legal In All US States |
Yes |
| TUV Approved (Europe) |
No |
| Air Filter Material |
Cotton Gauze |
| Title |
K&N 69-6501TB Performance Air Intake System |
| Replacement Filter |
RU-4730 |
| RPM |
5800 |
| Oil Included |
Yes |
| Couplers Included |
3 |
| Clamp Style |
Regular |
| Warranty |
No-Hassle Lifetime Limited |
| Estimated Horsepower Gain |
6.9 HP @ 5800 RPM |
| Length |
9.0000 |
| Width |
15.0000 |
| Height |
18.0000 |
| Weight |
8.0000 |
