The K&N 69-6020TR Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mazda Protege, Protege5 and MP3 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-6020TR cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Specifications:
| Description_DEF |
Engine Cold Air Intake Performance Kit |
| Description_DES |
Performance Air Intake System |
| Description_INV |
Performance Air Intake System |
| Description_EXT |
K&N's easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a red powder coat finish. |
| Description_MKT |
The K&N 69-6020TR Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mazda Protege, Protege5 and MP3 models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-6020TR cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake. |
| Description_SHO |
Air Intake System |
| Package Type |
Box |
| Horse Power Increase |
5 HP |
| Replacement Filter |
RU-4950 |
| Clamp Material |
Stainless Steel |
| Warranty |
No-Hassle Lifetime Limited |
| Clamps Included |
9 |
| TUV Approved (Europe) |
No |
| Air Filter Color |
Red |
| Prop 65 - Short Label |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
| Package Material |
Paperboard |
| Prop 65 Yes/No |
Yes |
| Street Legal In All US States |
Yes |
| Coupler Color/Finish |
Black |
| RPM |
3568 |
| Air Box Included |
No |
| Air Filter Outlet Shape |
Round |
| Weight |
9.3 lb (4.2 kg) |
| CARB EO Number |
D-269-24 |
| Clamp Color/Finish |
Natural |
| Prop 65 (C, R or CR) |
CR |
| Mounting Hardware Included |
Yes |
| System Type |
Complete Cold-Air Intake System |
| Intake Pipe Ports |
All intake tube ports needed for the specified applications are included |
| Product Style |
69 Series Typhoon Kits |
| Air Filter Washable |
Yes |
| Couplers Included |
4 |
| Air Filter Material |
Cotton Gauze |
| Oil Included |
Yes |
| Clamp Style |
Regular |
| Title |
K&N 69-6020TR Performance Air Intake System |
| Intake Pipe Color / Finish |
Red |
| Intake Pipe Material |
Aluminum |
| Mass Air Flow Sensor Adapter Included |
No |
| Estimated Horsepower Gain |
5 HP @ 3568 RPM |
| Prop 65 Warning Label |
https://www.knfilters.com/images/l/prop65.jpg |
| Length |
12.0000 |
| Width |
12.0000 |
| Height |
20.0000 |
| Weight |
9.0000 |
