The K&N 69-4516TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Chevrolet Cobalt models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-4516TS air intake comes with a black rubber topped K&N high-flow air filter that installs near the driver side wheel well to access cooler, denser air. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, pliers, a ratchet set and an Allen wrench. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Specifications:
| Description_DEF |
Engine Cold Air Intake Performance Kit |
| Description_DES |
Performance Air Intake System |
| Description_EXT |
K&N's easy-to-install Typhoon air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in a silver powder coat finish. |
| Description_SHO |
Air Intake System |
| Description_MKT |
The K&N 69-4516TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Chevrolet Cobalt models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-4516TS air intake comes with a black rubber topped K&N high-flow air filter that installs near the driver side wheel well to access cooler, denser air. Air is directed through the intake tube into the engine's throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, pliers, a ratchet set and an Allen wrench. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. |
| Description_INV |
Performance Air Intake System |
| Product Style |
69 Series Typhoon Kits |
| Prop 65 - Short Label |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
| Air Filter Outlet Shape |
Round |
| Mounting Hardware Included |
Yes |
| Air Box Included |
No |
| Air Filter Washable |
Yes |
| Couplers Included |
1 |
| Intake Pipe Color / Finish |
Silver |
| Estimated Horsepower Gain |
8.12 HP @ 5829 RPM |
| Oil Included |
Yes |
| Intake Pipe Material |
Aluminum |
| Air Filter Material |
Cotton Gauze |
| Clamp Style |
Regular |
| Clamp Material |
Stainless Steel |
| Coupler Color/Finish |
Black |
| Clamps Included |
3 |
| Air Filter Color |
Red |
| TUV Approved (Europe) |
No |
| Package Material |
Paperboard |
| Clamp Color/Finish |
Natural |
| Prop 65 Yes/No |
Yes |
| System Type |
Cold-Air Intake System |
| Prop 65 (C, R or CR) |
CR |
| Package Type |
Box |
| CARB EO Number |
D-269-32 |
| Mass Air Flow Sensor Adapter Included |
Yes |
| Weight |
5.8 lb (2.6 kg) |
| RPM |
5829 |
| Warranty |
No-Hassle Lifetime Limited |
| Replacement Filter |
RU-4990 |
| Intake Pipe Ports |
All intake tube ports needed for the specified applications are included |
| Horse Power Increase |
8 HP |
| Street Legal In All US States |
Yes |
| Title |
K&N 69-4516TS Performance Air Intake System |
| Prop 65 Warning Label |
https://www.knfilters.com/images/l/prop65.jpg |
| Length |
15.0000 |
| Width |
16.0000 |
| Height |
24.0000 |
| Weight |
6.0000 |
