The K&N 69-1302TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Prelude models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1302TP cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Specifications:
| Description_DES |
Performance Air Intake System |
| Description_DEF |
Engine Cold Air Intake Performance Kit |
| Description_EXT |
K&N's easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a chrome-like finish. |
| Description_INV |
Performance Air Intake System |
| Description_SHO |
Air Intake System |
| Description_MKT |
The K&N 69-1302TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Prelude models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1302TP cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake. |
| Coupler Color/Finish |
Black |
| CARB EO Number |
D-269-30 |
| Prop 65 Warning Label |
https://www.knfilters.com/images/l/prop65.jpg |
| Prop 65 Yes/No |
Yes |
| RPM |
6821 |
| Prop 65 (C, R or CR) |
CR |
| Clamp Color/Finish |
Natural |
| Package Type |
Box |
| Warranty |
No-Hassle Lifetime Limited |
| Package Material |
Paperboard |
| TUV Approved (Europe) |
No |
| Intake Pipe Ports |
All intake tube ports needed for the specified applications are included |
| Air Filter Color |
Red |
| Clamp Material |
Stainless Steel |
| Mass Air Flow Sensor Adapter Included |
No |
| Replacement Filter |
RU-4870 |
| Weight |
8 lb (3.6 kg) |
| Couplers Included |
2 |
| Mounting Hardware Included |
Yes |
| Clamps Included |
5 |
| System Type |
Complete Cold-Air Intake System |
| Air Filter Material |
Cotton Gauze |
| Intake Pipe Color / Finish |
Polished |
| Estimated Horsepower Gain |
7.12 HP @ 6821 RPM |
| Horse Power Increase |
7 HP |
| Air Box Included |
No |
| Title |
K&N 69-1302TP Performance Air Intake System |
| Product Style |
69 Series Typhoon Kits |
| Street Legal In All US States |
Yes |
| Clamp Style |
Regular |
| Oil Included |
Yes |
| Air Filter Washable |
Yes |
| Air Filter Outlet Shape |
Round |
| Prop 65 - Short Label |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
| Intake Pipe Material |
Aluminum |
| Length |
11.0000 |
| Width |
13.0000 |
| Height |
36.0000 |
| Weight |
8.0000 |
