The K&N 69-1208TS Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Accord models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1208TS cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the passenger side wheel well directing cooler outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Specifications:
| Description_DEF |
Engine Cold Air Intake Performance Kit |
| Description_DES |
Performance Air Intake System |
| Description_INV |
Performance Air Intake System |
| Description_EXT |
K&N's easy-to-install Typhoon cold air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a silver powder coat finish. |
| Description_SHO |
Air Intake System |
| Description_MKT |
The K&N 69-1208TS Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Accord models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1208TS cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the passenger side wheel well directing cooler outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean, colder air into the engine's throttle body for a guaranteed power gain. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. |
| Coupler Color/Finish |
Black |
| TUV Approved (Europe) |
No |
| Warranty |
No-Hassle Lifetime Limited |
| Prop 65 - Short Label |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
| Clamps Included |
5 |
| Air Filter Color |
Red |
| Weight |
6.8 lb (3.1 kg) |
| Prop 65 (C, R or CR) |
CR |
| Horse Power Increase |
6 HP |
| Mounting Hardware Included |
Yes |
| Clamp Material |
Stainless Steel |
| Clamp Color/Finish |
Natural |
| Air Box Included |
No |
| System Type |
Complete Cold-Air Intake System |
| Prop 65 Yes/No |
Yes |
| Package Material |
Paperboard |
| Replacement Filter |
RU-4950 |
| RPM |
5411 |
| Street Legal In All US States |
See Vehicle Applications |
| Air Filter Outlet Shape |
Round |
| CARB EO Number |
D-269-30 |
| Clamp Style |
Regular |
| Package Type |
Box |
| Estimated Horsepower Gain |
5.92 HP @ 5411 RPM |
| Oil Included |
Yes |
| Intake Pipe Ports |
All intake tube ports needed for the specified applications are included |
| Prop 65 Warning Label |
https://www.knfilters.com/images/l/prop65.jpg |
| Product Style |
69 Series Typhoon Kits |
| Mass Air Flow Sensor Adapter Included |
No |
| Title |
K&N 69-1208TS Performance Air Intake System |
| Couplers Included |
2 |
| Intake Pipe Color / Finish |
Silver |
| Air Filter Material |
Cotton Gauze |
| Air Filter Washable |
Yes |
| Intake Pipe Material |
Aluminum |
| Length |
11.0000 |
| Width |
13.0000 |
| Height |
36.0000 |
| Weight |
7.0000 |
