The K&N 69-1206TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Accord and VIII models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1206TP cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Specifications:
| Description_DEF |
Engine Cold Air Intake Performance Kit |
| Description_DES |
Performance Air Intake System |
| Description_EXT |
K&N's easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a chrome-like finish. |
| Description_INV |
Performance Air Intake System |
| Description_SHO |
Air Intake System |
| Description_MKT |
The K&N 69-1206TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Accord and VIII models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1206TP cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the driver side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake. |
| Clamps Included |
7 |
| Prop 65 Yes/No |
Yes |
| Prop 65 - Short Label |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
| Horse Power Increase |
4 HP |
| Air Filter Outlet Shape |
Round |
| Air Filter Color |
Red |
| Package Material |
Paperboard |
| Air Box Included |
No |
| System Type |
Complete Cold-Air Intake System |
| Prop 65 (C, R or CR) |
CR |
| CARB EO Number |
D-269-37 |
| Weight |
6.4 lb (2.9 kg) |
| TUV Approved (Europe) |
No |
| Clamp Style |
Regular |
| Mounting Hardware Included |
Yes |
| Replacement Filter |
RU-4870 |
| Intake Pipe Ports |
All intake tube ports needed for the specified applications are included |
| Intake Pipe Material |
Aluminum |
| RPM |
5097 |
| Coupler Color/Finish |
Black |
| Intake Pipe Color / Finish |
Polished |
| Air Filter Washable |
Yes |
| Package Type |
Box |
| Street Legal In All US States |
See Vehicle Applications |
| Product Style |
69 Series Typhoon Kits |
| Mass Air Flow Sensor Adapter Included |
No |
| Title |
K&N 69-1206TP Performance Air Intake System |
| Oil Included |
Yes |
| Air Filter Material |
Cotton Gauze |
| Clamp Material |
Stainless Steel |
| Warranty |
No-Hassle Lifetime Limited |
| Prop 65 Warning Label |
https://www.knfilters.com/images/l/prop65.jpg |
| Couplers Included |
3 |
| Clamp Color/Finish |
Natural |
| Estimated Horsepower Gain |
3.85 HP @ 5097 RPM |
| Length |
9.0000 |
| Width |
15.0000 |
| Height |
18.0000 |
| Weight |
6.0000 |
