The K&N 69-1203TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Accord models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The cold-air intake system accommodates the factory crank case vent hose and idle air bypass control thermal valve. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points requiring commonly available tools to do the job. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Specifications:
| Description_DEF |
Engine Cold Air Intake Performance Kit |
| Description_DES |
Performance Air Intake System |
| Description_INV |
Performance Air Intake System |
| Description_EXT |
K&N's easy to install Typhoon cold air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in an attractive chrome-like finish. |
| Description_SHO |
Air Intake System |
| Description_MKT |
The K&N 69-1203TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Accord models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in relatively cooler air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of denser air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The cold-air intake system accommodates the factory crank case vent hose and idle air bypass control thermal valve. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points requiring commonly available tools to do the job. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake. |
| Street Legal In All US States |
Yes |
| Title |
K&N 69-1203TP Performance Air Intake System |
| Clamps Included |
5 |
| Horse Power Increase |
9 HP |
| Warranty |
No-Hassle Lifetime Limited |
| TUV Approved (Europe) |
No |
| Estimated Horsepower Gain |
9.45 HP @ 5924 RPM |
| Mass Air Flow Sensor Adapter Included |
No |
| RPM |
5924 |
| Prop 65 (C, R or CR) |
CR |
| Prop 65 Warning Label |
https://www.knfilters.com/images/l/prop65.jpg |
| Prop 65 Yes/No |
Yes |
| Clamp Material |
Stainless Steel |
| Intake Pipe Ports |
All intake tube ports needed for the specified applications are included |
| Weight |
7.3 lb (3.3 kg) |
| Replacement Filter |
RU-4950 |
| Package Type |
Box |
| System Type |
Complete Cold-Air Intake System |
| Coupler Color/Finish |
Black |
| Product Style |
69 Series Typhoon Kits |
| Mounting Hardware Included |
Yes |
| Air Filter Color |
Red |
| Package Material |
Paperboard |
| Clamp Color/Finish |
Natural |
| Air Filter Washable |
Yes |
| Air Filter Material |
Cotton Gauze |
| CARB EO Number |
D-269-21 |
| Clamp Style |
Regular |
| Oil Included |
Yes |
| Couplers Included |
2 |
| Air Box Included |
No |
| Prop 65 - Short Label |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
| Air Filter Outlet Shape |
Round |
| Intake Pipe Material |
Aluminum |
| Intake Pipe Color / Finish |
Polished |
| Length |
9.0000 |
| Width |
15.0000 |
| Height |
18.0000 |
| Weight |
7.0000 |
