The K&N 69-1010TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Civic SI models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1010TP cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the passenger side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake.
Specifications:
| Description_DES |
Performance Air Intake System |
| Description_DEF |
Engine Cold Air Intake Performance Kit |
| Description_INV |
Performance Air Intake System |
| Description_EXT |
K&N's easy-to-install Typhoon cold-air intake system replaces the restrictive factory air filter and air intake housing delivering a guaranteed power gain. The low-restriction aluminum intake tubes come in a chrome-like finish. |
| Description_SHO |
Air Intake System |
| Description_MKT |
The K&N 69-1010TP Typhoon cold-air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Civic SI models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon cold-air intake which is designed to pull in outside air and dramatically reduce air flow restriction by smoothing and straightening air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine's RPM range. The 69-1010TP cold-air intake consists of a black rubber topped K&N high-flow air filter that mounts near the passenger side wheel well directing outside air through free-flowing aluminum tubing into a short ram induction tube that delivers high volumes of clean air into the engine's throttle body for a guaranteed power gain. The oversized cone shaped air filter comes with a water repellent DryCharger filter wrap to protect the filter from moisture. The air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This cold air intake is relatively easy to install usually in 90 minutes or less. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the vehicle applications and specific CARB status for each vehicle and air intake. |
| Package Material |
Paperboard |
| Air Filter Color |
Red |
| System Type |
Complete Cold-Air Intake System |
| CARB EO Number |
D-269-30 |
| Mounting Hardware Included |
Yes |
| Weight |
6.8 lb (3.1 kg) |
| Prop 65 (C, R or CR) |
CR |
| Prop 65 Yes/No |
Yes |
| Clamps Included |
5 |
| Air Filter Outlet Shape |
Round |
| Horse Power Increase |
11 HP |
| Intake Pipe Material |
Aluminum |
| Couplers Included |
2 |
| Clamp Material |
Stainless Steel |
| Prop 65 Warning Label |
https://www.knfilters.com/images/l/prop65.jpg |
| Street Legal In All US States |
Yes |
| Warranty |
No-Hassle Lifetime Limited |
| Intake Pipe Ports |
All intake tube ports needed for the specified applications are included |
| Coupler Color/Finish |
Black |
| Clamp Style |
Regular |
| Package Type |
Box |
| Mass Air Flow Sensor Adapter Included |
No |
| RPM |
7100 |
| Air Filter Washable |
Yes |
| Estimated Horsepower Gain |
10.57 HP @ 7100 RPM |
| Clamp Color/Finish |
Natural |
| Title |
K&N 69-1010TP Performance Air Intake System |
| TUV Approved (Europe) |
No |
| Oil Included |
Yes |
| Air Box Included |
No |
| Product Style |
69 Series Typhoon Kits |
| Air Filter Material |
Cotton Gauze |
| Intake Pipe Color / Finish |
Polished |
| Prop 65 - Short Label |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov |
| Replacement Filter |
RU-4870 |
| Length |
9.0000 |
| Width |
15.0000 |
| Height |
18.0000 |
| Weight |
7.0000 |
