| Description_DEF |
Intercooler Pipe Set |
| Description_DES |
Ford 6.7L Powerstroke Cold-Side Intercooler Pipe and Boot Kit |
| Description_EXT |
Cold-Side Intercooler Pipe and Boot Kit, fits Ford 6.7L Powerstroke 2011-2016 |
| Description_FAB |
Direct fit for the 2011-2016 6.7L Powerstroke |
| Description_FAB |
Replaces weak stock plastic pipe |
| Description_FAB |
Installs in under an hour |
| Description_FAB |
CNC-machined stock-style coupling allows for quick install |
| Description_FAB |
Mandrel-bent, polished aluminum pipe eliminates restrictive bends |
| Description_FAB |
Does not require additional tuning |
| Description_FAB |
Includes new O-ring and spring clip |
| Description_FAB |
Includes Mishimoto Silicone Boots with DuraCore (TM) technology and Mishimoto Constant Tension T-Bolt Clamps |
| Description_FAB |
Mishimoto Lifetime Warranty |
| Description_INV |
Mishimoto MMICP-F2D-11CBK |
| Description_MKT |
Mishimoto has developed a cold-side intercooler pipe and boot kit for the 2011+ 6.7L Powerstroke. The factory plastic pipe and boot commonly explode or burst due to the heat and increased boost levels of your high-powered 6.7L |
| Description_MKT |
upgrade to the Mishimoto kit for increased reliability, durability, and performance. The Mishimoto cold-side pipe is constructed of mandrel-bent aluminum with a polished finish. A 100-percent CNC-machined 6061 aluminum coupling allows you to retain your trucks factory emissions components and allows for a quick install. The Mishimoto cold-side pipe eliminates restrictive bends in the factory pipe, allowing for improvements in airflow, power, and EGTs. This kit includes Mishimoto silicone Boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone Diesel Boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto Constant-Tension T-bolt Clamps for accurate and consistent holding power. This cold-side pipe and boot kit is the perfect addition to your 6.7L Powerstroke truck. It is made in the USA and includes the Mishimoto Lifetime Warranty. |
| Description_SHO |
Turbo Intercool Pipe |
| SellingPoint06 |
Does not require additional tuning |
| TechSpec Outlet (in) |
N/A |
| TechSpec Overall Height (in) |
N/A |
| TechSpec Overall Width (in) |
N/A |
| SellingPoint03 |
Installs in under an hour |
| SellingPoint10 |
N/A |
| TechSpec Applications |
2011-2016 Ford F-250 w/ 6.7L Powerstroke--2011-2016 F-350 w/ 6.7L Powerstroke--2011-2016 F-450 w/ 6.7L Powerstroke--2011-2016 F-550 w/ 6.7L Powerstroke |
| SellingPoint04 |
CNC-machined stock-style coupling allows for quick install |
| SellingPoint13 |
N/A |
| TechSpec Chassis Codes |
N/A |
| TechSpec Engine Codes |
N/A |
| TechSpec Inlet (in) |
N/A |
| TechSpec Maximum Recommended Horsepower |
N/A |
| TechSpec Weight (lbs) |
N/A |
| Install Difficulty |
N/A |
| SellingPoint01 |
Direct fit for the 2011-2016 6.7L Powerstroke |
| SellingPoint02 |
Replaces weak stock plastic pipe |
| SellingPoint05 |
Mandrel-bent, polished aluminum pipe eliminates restrictive bends |
| SellingPoint07 |
Includes new O-ring and spring clip |
| SellingPoint08 |
Includes Mishimoto Silicone Boots with DuraCore technology and Mishimoto Constant Tension T-Bolt Clamps |
| SellingPoint09 |
Mishimoto Lifetime Warranty |
| SellingPoint11 |
N/A |
| SellingPoint12 |
N/A |
| SellingPoint14 |
N/A |
| SellingPoint15 |
N/A |
| TechSpec Centerline Radius |
N/A |
| TechSpec Core Height (in) |
N/A |
| TechSpec Core Length (in) |
N/A |
| TechSpec Core Thickness (in) |
N/A |
| TechSpec Core Type |
N/A |
| TechSpec Includes |
(1) Aluminum Intercooler Pipe w/ CNC Quick-Disconnect Flange, O-Ring, and Spring Clip--(1) Aluminum Intercooler Pipe w/ CNC IAT Sensor Housing--(2) Silicone Boots with DuraCore Technology--(4) Constant-Tension T-Bolt Clamps--(2) Aluminum Mishimoto M Logo Badges--Mishimoto Lifetime Warranty |
| TechSpec Installation Notes |
27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM). |
| TechSpec Maximum Recommended Boost Pressure (PSI) |
N/A |
| TechSpec Note |
Mishimoto has improved this product by including an O-ring and spring clip. If you did not receive these components with your kit, contact our customer experience team or remove the stock O-ring and spring clip and install them onto your Mishimoto CNC-machined coupling. |
| TechSpec Overall Length (in) |
N/A |
| TechSpec Pipe Diameter |
N/A |
| TechSpec Pipe Length |
N/A |
| TechSpec Pipe Shape |
N/A |
| Length |
10.0000 |
| Width |
8.0000 |
| Height |
14.0000 |
| Weight |
13.0000 |
