The factory oil filter location on the Gen III Hemi may interfere with the crossmember or suspension in some engine swaps. These block-off plates & relocation kits allow the oil filter to be moved to a remote location. The block-off adapter screws on instead of the oil filter and the two 3/8 in. NPT ports on the block near the filter allow installation of the AN hoses for plumbing the remote filter. Aluminum construction with black anodized finish.
Specifications:
Description_ASC |
Most 2003-2007 Gen III Hemi Engines Use Oil Filters w/ 3/4"-16 Threads - use HEMI0002ERL or HEMI0004ERL.
Most 2008-up Gen III Hemi Engines use Oil Filters w/ M22 x 1.5 Threads - Use HEMI0001ERL or HEMI0003ERL.
A remote oil filter must be plumbed to the two 3/8" NPT ports on the cylinder block near the factory oil filter (the bottom port on the engine block is the inlet & the upper port is the outlet).
The remote oil filter mount uses Fram PH-8 or HP-1 oil filter or equivalent. |
Description_DEF |
Engine Oil Filter Remote Mounting Kit |
Description_DES |
Earl's Oil Filter Relocation Kit - Mopar Gen III Hemi - Fits M22 x 1.5 Filters |
Description_EXT |
Oil Filter Relocation Kit; For Use Mopar Gen III Hemi; Fits M22 x 1.5 Filters; 3.000 in. Dia.; 1.000 in. Height; 6061 Aluminum; |
Description_INV |
G3 OIL FILTER RELOCATION KIT - M22 THRD |
Description_SHO |
RmtOilFltKt |
Description_FAB |
Relocate the Oil Filter on Gen III Hemi Engines - Ideal for Engine Swaps Where Extra Clearance is Needed |
Description_FAB |
Choose From a Block-Off Plate or Complete Oil Filter Relocation Kit |
Description_FAB |
Most 2003-2007 Engines Use 3/4"-16 Threads on the Filter (Use HEMI0002ERL or HEMI0004ERL) |
Description_FAB |
Most 2008-up Engines Use M22 x 1.5 Threads on the Filter (Use HEMI0001ERL or HEMI0003ERL) |
Description_FAB |
Oil Filter Relocation Kits (HEMI0003ERL & HEMI0004ERL) Include the Block-Off Adapter, Adapter Fittings, Push-On Hose, Hose Ends, and the Remote Filter Adapter (Everything Needed To Move the Filter) |
Description_FAB |
The Gen III Hemi Block Has Two 3/8" NPT Ports Located Near the Filter for Plumbing to the Remote Filter (When the Factory Filter is Blocked Off) |
Description_FAB |
Block-Off Adapter is Made from Aluminum w/ Black Anodized Finish - Attractive & Corrosion Resistant |
Description_MKT |
The factory oil filter location on the Gen III Hemi may interfere with the crossmember or suspension in some engine swaps. These block-off plates & relocation kits allow the oil filter to be moved to a remote location. The block-off adapter screws on instead of the oil filter and the two 3/8 in. NPT ports on the block near the filter allow installation of the AN hoses for plumbing the remote filter. Aluminum construction with black anodized finish. |
Hose Size |
10 AN |
Diameter |
3 in. |
Emission Code |
5 |
Hose Length |
10 Feet |
Inner O-Ring Diameter |
1.380" |
Brand |
Earl's |
Center Stud Size |
22MM x 1.5 |
Finish |
Anodized Black |
O-Ring Cross Section |
.139 Inches |
Outer O-Ring Diameter |
2.693" |
WARNING CA Proposition 65 |
No |
Height |
1.000" |
Outside Diameter |
3.000" |
Product Type |
Oil Filter Relocation Kit |
Wrench Size |
1-1/4 |
Material |
6061 Aluminum |
Length |
11.0000 |
Width |
13.0000 |
Height |
12.0000 |
Weight |
3.0000 |