| Description_DEF |
Exhaust Manifold Down Pipe |
| Description_EXT |
Catted Downpipe fits Chevrolet Camaro 2.0T 2016+/Cadillac ATS 2.0T 2013+ |
| Description_DES |
Chevrolet Camaro 2.0T 2016+/Cadillac ATS 2.0T 2013+ Catted Downpipe |
| Description_MKT |
Factory downpipes can be a serious choke-point in the exhaust system of turbocharged cars. Through our testing on the 2016+ Chevy Camaro 2.0T, we found that the downpipe was obstructive, and so sought to amend that by designing one to help open the exhaust flow. Mishimoto's downpipe consists of a 3? diameter to expand the route and is constructed of 304 stainless steel to avoid corrosion, seen with materials like aluminum. We also help you save on weight with a product that?s only 9 pounds, 8 less than the factory unit. With a 7 hp and 10 ft-lbs gain, you will feel the upgrade from this bolt-on part when hitting the gas pedal. Our downpipe includes a high-performance catalytic converter, but requires a tune for it to be safely used on your LTG engine, and it is recommended for off-road use only. Both the 2016+ Camaro 2.0T and 2013+ Cadillac ATS 2.0T can make use of this upgrade, as it is a bolt-on part for each application. It easily bolts to either the stock exhaust or our upgraded full 3in cat-back exhaust. All hardware is supplied, including bracketry, and does not require any modifications to your car. The downpipe also comes with the Mishimoto Lifetime Warranty. |
| Description_INV |
Mishimoto MMDP-CAM4-16CAT |
| Description_FAB |
Direct fit for the 2016+ Chevrolet Camaro 2.0T/2013+ Cadillac ATS 2.0T |
| Description_FAB |
Dyno-proven maximum gains up to 7 whp and 10 wtq |
| Description_FAB |
Aggressive turbo and exhaust tone under acceleration and boost |
| Description_FAB |
304 stainless steel design with 3" diameter allows for uninterrupted exhaust flow |
| Description_FAB |
8 pounds lighter than stock downpipe |
| Description_FAB |
Stainless steel CNC-machined mounting flanges for seamless connection to the turbo and exhaust |
| Description_FAB |
Includes stainless steel bracket to properly connect to stock location of the ATS |
| Description_FAB |
New hardware is provided for installation |
| Description_FAB |
Mishimoto Lifetime Warranty |
| Description_SHO |
Manifold Down Pipe |
| SellingPoint08 |
New hardware is provided for installation |
| SellingPoint09 |
Mishimoto Lifetime Warranty |
| SellingPoint03 |
Aggressive turbo and exhaust tone under acceleration and boost |
| SellingPoint06 |
Stainless steel CNC-machined mounting flanges for seamless connection to the turbo and exhaust |
| SellingPoint10 |
N/A |
| TechSpec Applications |
2016+ Chevrolet Camaro 2.0T--2013+ Cadillac ATS 2.0T |
| TechSpec Overall Height (Inches) |
N/A |
| Install Difficulty |
3 |
| SellingPoint01 |
Direct fit for the 2016+ Chevrolet Camaro 2.0T/2013+ Cadillac ATS 2.0T |
| SellingPoint02 |
Dyno-proven maximum gains up to 7 whp and 10 wtq |
| SellingPoint04 |
304 stainless steel design with 3-in diameter allows for uninterrupted exhaust flow |
| SellingPoint05 |
8 pounds lighter than stock downpipe |
| SellingPoint07 |
Includes stainless steel bracket to properly connect to stock location of the ATS |
| SellingPoint11 |
N/A |
| SellingPoint12 |
N/A |
| SellingPoint13 |
N/A |
| SellingPoint14 |
N/A |
| SellingPoint15 |
N/A |
| TechSpec Chassis Codes |
Alpha |
| TechSpec Engine Codes |
LTG |
| TechSpec Includes |
(1) Stainless Steel Catted Downpipe w/ 4-Bolt and 2-Bolt Flanges--(2) Exhaust Flange Bolts--(2) Exhaust Flange Nuts--(1) Mounting Bracket w/ Additional Hardware--Mishimoto Lifetime Warranty |
| TechSpec Material |
304 Stainless Steel |
| TechSpec Note |
This downpipe cannot be used with the stock ECU programming. The customer must retune the vehicle's ECU after installing the downpipe. Power gains will vary depending on the type of ECU tune applied to the vehicle, and other supporting modifications installed.----The Mishimoto downpipe is for track and off-road use only. The customer must have a professional engine tune/calibration after installing the downpipe.----Catalytic Converter: 200 Cell Spun Metallic Core |
| TechSpec Overall Length (Inches) |
N/A |
| TechSpec Overall Width (Inches) |
N/A |
| TechSpec Pipe Diameter |
3-inch |
| TechSpec Weight (Pounds) |
9 |
| Length |
14.0000 |
| Width |
14.0000 |
| Height |
24.0000 |
| Weight |
12.0000 |
