As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications. Engineered, forged and machined 100% in the USA, JE Pistons are designed for each specific engine and racing application to provide the ultimate combination of durability and performance. From dirt track to drag strip, JE Pistons performance is proven in victory lane time and time again. Equip your engine with the best in forged pistons.
Specifications:
| Description_ASM |
Chevrolet LS Stroker |
| Description_DEF |
Engine Piston |
| Description_FAB |
- Forged in the USA using 2618 aluminum, yielding high tensile strength needed for high-demand performance applications
- Designed specifically for each engine and use application to provide optimized performance durability
- Proprietary Forged Side Relief (FSR) forging design minimizes friction and power loss with reduced skirt width and saves additional weight with a shorter wrist pin
- Skirt coating (depending on application) reduces friction and wear on piston skirts and cylinder walls while simultaneously reducing operating noise
- Accumulator groove (depending on application) helps reduce pressure from combustion gases, reducing ring fluttering and improving ring seal for consistent power
- Made 100% in the USA
|
| Description_EXT |
JE, Chevrolet, LS Gen III/IV, 4.185 in. Bore, 1.115 CD, Dome, Right Piston |
| Description_DES |
Piston Single, 2618, Dome, 4.185 Bore, 1.115 CD, 0.927 Pin, Set of 1. |
| Description_TLE |
Chevrolet LS, 4.185 Bore, Dome, Set of 1 |
| Description_SHO |
Piston |
| Description_INV |
JE Pistons, Piston |
| Description_MKT |
As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications. Engineered, forged and machined 100% in the USA, JE Pistons are designed for each specific engine and racing application to provide the ultimate combination of durability and performance. From dirt track to drag strip, JE Pistons? performance is proven in victory lane time and time again. Equip your engine with the best in forged pistons. |
| Add-On |
927-2250-15-51C |
| Add-On |
927-073-MW |
| Add-On |
JG3108-4185-3 |
| Bore Diameter |
4.185 |
| Compression Height |
1.115 |
| Cylinder Head |
GM LS1 15 DEG |
| Category Hierarchy |
Auto>JE Pistons>Single Replacement Pistons>Domestic |
| Make |
CHEVROLET |
| Engine |
LS Gen III/IV |
| Forging Type |
FSR |
| Engine Type |
ICE |
| Industry |
Automotive |
| Engine - Web |
LS Gen III/IV |
| Piston Series |
JE Pistons |
| Out of Stock Message |
Call for Availability |
| Second Compression Ring Thickness |
0.0600 |
| Piston Material |
2618 |
| Top Compression Ring Thickness |
0.0480 |
| Ringset Included |
No |
| Piston Orientation |
Right |
| Piston Pin Outside Diameter |
0.927 |
| Title |
JE Pistons - Chevrolet, LS Gen III/IV, 4.185 in. Bore, Piston |
| Piston Quantity |
1 |
| Piston Average Weight |
442 |
| Piston Volume |
-0.80 |
| Prop 65 Yes/No |
Yes |
| Oil Ring Thickness |
0.149 |
| Title - Web |
JE Pistons Chevrolet LS Gen III/IV Piston - 4.185 in. Bore - 1.115 in. CH, -0.80 CC |
| Product Type |
Engine Piston |
| Piston Pin Wall Thickness |
0.150 |
| Piston Pin Length |
2.250 |
| Piston Pin Material |
5115 |
| Prop 65 (C, R or CR) |
CR |
| Product Market |
Domestic |
| Piston Head Type |
Dome |
| Prop 65 - Short Label |
Prop 65 Warning Label.JPG |
| Wrist Pin Length |
2.250 |
| Wrist Pin Wall Thickness |
0.150 |
| Wrist Pin Outer Diameter |
0.927 |
| Ring Set Included |
No |
| Wrist Pin Material |
5115 Low Carbon Steel, Case Hardened |
| Make - Web |
Chevrolet |
| Length |
5.0000 |
| Width |
5.0000 |
| Height |
5.0000 |
| Weight |
1.0000 |
