As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications. Engineered, forged and machined 100% in the USA, JE Pistons are designed for each specific engine and racing application to provide the ultimate combination of durability and performance. From dirt track to drag strip, JE Pistons performance is proven in victory lane time and time again. Equip your engine with the best in forged pistons.
Specifications:
| Description_ASM |
Chevrolet LS Stroker |
| Description_DEF |
Engine Piston |
| Description_EXT |
JE, Chevrolet, LS Gen III/IV, 4.135 in. Bore, 1.115 CD, Dome, Right Piston |
| Description_FAB |
- Forged in the USA using 2618 aluminum, yielding high tensile strength needed for high-demand performance applications
- Designed specifically for each engine and use application to provide optimized performance durability
- Proprietary Forged Side Relief (FSR) forging design minimizes friction and power loss with reduced skirt width and saves additional weight with a shorter wrist pin
- Skirt coating (depending on application) reduces friction and wear on piston skirts and cylinder walls while simultaneously reducing operating noise
- Accumulator groove (depending on application) helps reduce pressure from combustion gases, reducing ring fluttering and improving ring seal for consistent power
- Made 100% in the USA
|
| Description_DES |
Piston Single, 2618, Dome, 4.135 Bore, 1.115 CD, 0.927 Pin, Set of 1. |
| Description_SHO |
Piston |
| Description_MKT |
As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications. Engineered, forged and machined 100% in the USA, JE Pistons are designed for each specific engine and racing application to provide the ultimate combination of durability and performance. From dirt track to drag strip, JE Pistons? performance is proven in victory lane time and time again. Equip your engine with the best in forged pistons. |
| Description_TLE |
Chevrolet LS, 4.135 Bore, Dome, Set of 1 |
| Description_INV |
JE Pistons, Piston |
| Add-On |
JG31F8-4135-2 |
| Add-On |
927-2250-15-51C |
| Add-On |
927-073-MW |
| Bore Diameter |
4.135 |
| Compression Height |
1.115 |
| Oil Ring Thickness |
0.149 |
| Engine Type |
ICE |
| Make |
CHEVROLET |
| Out of Stock Message |
Call for Availability |
| Cylinder Head |
GM LS1 15 DEG |
| Industry |
Automotive |
| Engine |
LS Gen III/IV |
| Category Hierarchy |
Auto>JE Pistons>Single Replacement Pistons>Domestic |
| Forging Type |
FSR |
| Make - Web |
Chevrolet |
| Engine - Web |
LS Gen III/IV |
| Prop 65 (C, R or CR) |
CR |
| Piston Average Weight |
429 |
| Top Compression Ring Thickness |
0.0480 |
| Piston Material |
2618 |
| Piston Head Type |
Dome |
| Second Compression Ring Thickness |
0.0600 |
| Piston Pin Wall Thickness |
0.150 |
| Piston Pin Material |
5115 |
| Piston Pin Outside Diameter |
0.927 |
| Title |
JE Pistons - Chevrolet, LS Gen III/IV, 4.135 in. Bore, Piston |
| Product Market |
Domestic |
| Product Type |
Engine Piston |
| Ringset Included |
No |
| Prop 65 Yes/No |
Yes |
| Piston Volume |
0.90 |
| Title - Web |
JE Pistons Chevrolet LS Gen III/IV Piston - 4.135 in. Bore - 1.115 in. CH, 0.90 CC |
| Piston Orientation |
Right |
| Piston Series |
JE Pistons |
| Piston Pin Length |
2.250 |
| Piston Quantity |
1 |
| Ring Set Included |
No |
| Wrist Pin Length |
2.250 |
| Prop 65 - Short Label |
Prop 65 Warning Label.JPG |
| Wrist Pin Wall Thickness |
0.150 |
| Wrist Pin Material |
5115 Low Carbon Steel, Case Hardened |
| Wrist Pin Outer Diameter |
0.927 |
| Length |
5.0000 |
| Width |
5.0000 |
| Height |
5.0000 |
| Weight |
1.0000 |
