As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications. Engineered, forged and machined 100% in the USA, JE Pistons are designed for each specific engine and racing application to provide the ultimate combination of durability and performance. From dirt track to drag strip, JE Pistons performance is proven in victory lane time and time again. Equip your engine with the best in forged pistons.
Specifications:
| Description_ASM |
Chevrolet LS |
| Description_DES |
Piston Single, 2618, Inv Dome/Dish, 4.010 Bore, 1.065 CD, 0.927 Pin, Set of 1. |
| Description_DEF |
Engine Piston |
| Description_FAB |
- Forged in the USA using 2618 aluminum, yielding high tensile strength needed for high-demand performance applications
- Designed specifically for each engine and use application to provide optimized performance durability
- Proprietary Forged Side Relief (FSR) forging design minimizes friction and power loss with reduced skirt width and saves additional weight with a shorter wrist pin
- Skirt coating (depending on application) reduces friction and wear on piston skirts and cylinder walls while simultaneously reducing operating noise
- Accumulator groove (depending on application) helps reduce pressure from combustion gases, reducing ring fluttering and improving ring seal for consistent power
- Made 100% in the USA
|
| Description_INV |
JE Pistons, Piston |
| Description_EXT |
JE, Chevrolet, LS Gen III/IV, 4.010 in. Bore, 1.065 CD, Inverted Dome/Dish, Right Piston |
| Description_MKT |
As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications. Engineered, forged and machined 100% in the USA, JE Pistons are designed for each specific engine and racing application to provide the ultimate combination of durability and performance. From dirt track to drag strip, JE Pistons? performance is proven in victory lane time and time again. Equip your engine with the best in forged pistons. |
| Description_SHO |
Piston |
| Description_TLE |
Chevrolet LS, 4.010 Bore, Dish, Set of 1 |
| Add-On |
927-073-MW |
| Add-On |
927-2250-17-51C |
| Add-On |
JG3108-4010-4 |
| Bore Diameter |
4.010 |
| Engine |
LS Gen III/IV |
| Make |
CHEVROLET |
| Forging Type |
FSR |
| Industry |
Automotive |
| Engine Type |
ICE |
| Category Hierarchy |
Auto>JE Pistons>Single Replacement Pistons>Domestic |
| Cylinder Head |
LS 12 DEG/15 DEG COMBO VR |
| Oil Ring Thickness |
0.149 |
| Out of Stock Message |
Call for Availability |
| Compression Height |
1.065 |
| Engine - Web |
LS Gen III/IV |
| Make - Web |
Chevrolet |
| Title - Web |
JE Pistons Chevrolet LS Gen III/IV Piston - 4.010 in. Bore - 1.065 in. CH, -29.20 CC |
| Prop 65 Yes/No |
Yes |
| Second Compression Ring Thickness |
0.0600 |
| Product Type |
Engine Piston |
| Title |
JE Pistons - Chevrolet, LS Gen III/IV, 4.010 in. Bore, Piston |
| Piston Quantity |
1 |
| Piston Orientation |
Right |
| Prop 65 (C, R or CR) |
CR |
| Piston Volume |
-29.20 |
| Ringset Included |
No |
| Piston Pin Length |
2.250 |
| Piston Average Weight |
400 |
| Piston Pin Material |
5115 |
| Product Market |
Domestic |
| Piston Head Type |
Dish |
| Piston Series |
JE Pistons |
| Piston Pin Outside Diameter |
0.927 |
| Top Compression Ring Thickness |
0.0480 |
| Piston Material |
2618 |
| Piston Pin Wall Thickness |
0.170 |
| Prop 65 - Short Label |
Prop 65 Warning Label.JPG |
| Ring Set Included |
No |
| Wrist Pin Outer Diameter |
0.927 |
| Wrist Pin Wall Thickness |
0.170 |
| Wrist Pin Material |
5115 Low Carbon Steel, Case Hardened |
| Wrist Pin Length |
2.250 |
| Length |
5.0000 |
| Width |
5.0000 |
| Height |
5.0000 |
| Weight |
1.0000 |
