Your Small Town Parts Store With More!
×
Sold out
  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Performance matched parts

  • Nationwide Delivery

    Economy shipping

Holley 300-309 351W Ford Hi-Ram EFI Manifold with Side Mount Top

2 sold in last 8 days
Holley
ds_BBVL_300-309
Engine Intake Manifold
$1,678.70

customers are viewing this product
Holley 300-309 351W Ford Hi-Ram EFI Manifold with Side Mount Top

This EFI 351W Hi-Ram manifold comes with a 95MM 1986-95 Ford 5.0 throttle body flange side mount top. The runner length and tapered cross section design will perform well for a wide range of engine combinations. The engineering team also redesigned the water crossover passage to allow room for distributor phasing. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! HOLLEY EFI, HOLLEY EFI,Manifold is designed for a 9.5" deck height. HOLLEY EFI, HOLLEY EFI,ΓÇó Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations HOLLEY EFI, HOLLEY EFI,ΓÇó EFI fuel rails are machined for -8AN O-ring Fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits. HOLLEY EFI, HOLLEY EFI,ΓÇó Cast aluminum construction. HOLLEY EFI, HOLLEY EFI,*** Requires the Use of Holley EFI Dual Sync Distributor - 565-111

Specifications:

Description_ASC *** Please see the diagrams in the product images for other dimensions. HOLLEY EFI,*** A low profile distributor will be needed when using this manifold. *** Requires the Use of Holley EFI Dual Sync Distributor - 565-111 HOLLEY EFI,Warning: HOLLEY EFI,Many Ford vehicle models were originally equipped with a heater core flow restrictor located at either the original heater hose fitting in the factory intake or inline in the inlet heater hose which protects the heater core from damage. If you are replacing the hoses between the engine and heater core or changing the factory fitting check to see if your application requires a flow restrictor. Failure to use the proper flow restrictor will likely result in a damaged or leaking heater core.
Description_DEF Engine Intake Manifold
Description_DES 351W Ford Hi-Ram EFI Manifold with Side Mount Top
Description_INV MFLD KIT, FORD 351W HI-RAM 95MM SIDE
Description_FAB EFI fuel rails are machined for -8AN o-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits.
Description_FAB Plenum Top Gasket Type - 3/32" Round O-ring Cord
Description_FAB Manifold is designed for a 9.5" deck height.
Description_FAB The 351W manifold is available to work with 95MM throttle bodies
Description_FAB Ford 5.0 throttle body fitment
Description_FAB Lid has been verified to fit under Cervinis 2.5" cowl hood on 1979-1993 Mustangs with 351W & 302W Hi-Ram bases when using motor mounts that retain stock engine locations.
Description_FAB Designed for side mounted throttle bodies
Description_FAB Allows room for designing boosted applications
Description_FAB Requires the Use of Holley EFI Dual Sync Distributor - 565-111
Description_EXT EFI Intake Manifold; Requires Holley EFI Distributor PN [565-111]; Hi Ram; 351W; 95mm Throttle Body Flange Side Mount Top; Cast Aluminum;
Description_MKT This EFI 351W Hi-Ram manifold comes with a 95MM 1986-95 Ford 5.0 throttle body flange side mount top. The runner length and tapered cross section design will perform well for a wide range of engine combinations. The engineering team also redesigned the water crossover passage to allow room for distributor phasing. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! HOLLEY EFI, HOLLEY EFI,Manifold is designed for a 9.5" deck height. HOLLEY EFI, HOLLEY EFI,ΓÇó Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations HOLLEY EFI, HOLLEY EFI,ΓÇó EFI fuel rails are machined for -8AN O-ring Fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits. HOLLEY EFI, HOLLEY EFI,ΓÇó Cast aluminum construction. HOLLEY EFI, HOLLEY EFI,*** Requires the Use of Holley EFI Dual Sync Distributor - 565-111
Description_MKT Manifold is designed for a 9.5" deck height.
Description_MKT ΓÇó Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations
Description_MKT ΓÇó EFI fuel rails are machined for -8AN O-ring Fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits.
Description_MKT ΓÇó Cast aluminum construction.
Description_MKT *** Requires the Use of Holley EFI Dual Sync Distributor - 565-111
Description_SHO Intake Manifold
Cylinder Head Type Ford 351W
Usage Racing
Brand Holley EFI
Engine Ford 351W
WARNING CA Proposition 65 No
Position N/A
Engine Make/Size Ford 351W
Emission Code 3
Finish Satin
Flange Style EFI
Manifold Type Hi-Ram
Port Size 2.00" x 1.190"
Product Type Intake Manifold
RPM Power Band 1500-7000
Warranty Limited 90 Day
Color Natural
Construction Cast
Fuel System Type EFI
Throttle Bore 95mm
Length 15.0000
Width 16.0000
Height 27.0000
Weight 34.0000
Read More
Read Less
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×