Edelbrock part #7186 Performer RPM 383 intake manifold is designed for 361-383-400 c.i.d. Chryslers. The dual-plane design results in excellent low-end torque and high rpm power. High flow runner design will handle the popular stroker combinations. For high-performance street/strip applications. Will not fit 1962-64 Max Wedge heads.
Specifications:
| Description_ABR |
Intake Mnfld |
| Description_DEF |
Engine Intake Manifold |
| Description_EXT |
Edelbrock Performer RPM Intake Manifold for Chrysler 361-383-400 Big-Block V8 |
| Description_INV |
Performer RPM 383 Chrysler Intake |
| Description_LAB |
Performer RPM Big Block Chrysler B Intake Manifold |
| Description_MKT |
Edelbrock part #7186 Performer RPM 383 intake manifold is designed for 361-383-400 c.i.d. Chryslers. The dual-plane design results in excellent low-end torque and high rpm power. High flow runner design will handle the popular stroker combinations. For high-performance street/strip applications. Will not fit 1962-64 Max Wedge heads. |
| Description_TRA |
Recommended intake gasket: Edelbrock #7225 |
| Description_TRA |
Manifold height.: A-4.90", B-5.80" |
| Description_TRA |
Carb pad height: 5.35" |
| Description_TRA |
Carb recommendations: Edelbrock AVS2 or Performer Series 650-800 cfm. Use #1481 or #1843 throttle/transmission lever kit. |
| Description_TRA |
Port exit dimensions: 1.13" x 2.13" |
| Description_TRA |
Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA |
Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| Single Or Dual Plane Type |
Dual |
| Rear Maximum Height |
5.800 |
| Center Maximum Height |
5.350 |
| Material |
Aluminum |
| Grade Type |
Performance |
| Gasket Or Seal Included |
No |
| Basic Operating RPM Range |
1500-6500 |
| Series |
Performer RPM |
| RGL |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| CNC Ported |
No |
| Flange Type |
4150 |
| Vehicle Model |
Chrysler |
| EGR Port |
No |
| Front Maximum Height |
4.900 |
| Finish |
Satin |
| Length |
8.0000 |
| Width |
15.0000 |
| Height |
24.0000 |
| Weight |
20.0000 |
