Edelbrock part #7156-BP Performer RPM Pontiac intake manifold is designed for 1965-79 street 326-455 c.i.d. Pontiac V8's (except Ram Air V and 265/301 V8's). The PN 7156-BP version comes with a beautiful reflective Black Plasma finish that is durable and easy to maintain. The Plasma finishes are applied by a fully automated 7 stage prewash and 4 stage finish. A durable clear powder coat finises the process. Recommended for high-performance street, strip and marine. Has clearance for HEI distributor. Will not fit under Trans Am Shaker hood without modifications
Specifications:
| Description_ABR |
Intake Mnfld |
| Description_ASM |
Pontiac:-:326 (5.3L)/350 (5.7L)/389 (6.4L)/400 (6.6L)/421 (6.9L)/428 (7.0L)/455 (7.4) |
| Description_DES |
Performer RPM Pontiac 326-455 Intake Manifold, Black Plasma Finish |
| Description_DEF |
Engine Intake Manifold |
| Description_EXT |
Edelbrock Performer RPM Pontiac Intake Manifold for Pontiac 326-455 V8 with a beautiful Black Plasma finish. |
| Description_INV |
RPM Pontiac 1965-79 Intake Manifold |
| Description_MKT |
Edelbrock part #7156-BP Performer RPM Pontiac intake manifold is designed for 1965-79 street 326-455 c.i.d. Pontiac V8's (except Ram Air V and 265/301 V8's). The PN 7156-BP version comes with a beautiful reflective Black Plasma finish that is durable and easy to maintain. The Plasma finishes are applied by a fully automated 7 stage prewash and 4 stage finish. A durable clear powder coat finises the process. Recommended for high-performance street, strip and marine. Has clearance for HEI distributor. Will not fit under Trans Am Shaker hood without modifications |
| Description_SHP |
None |
| Description_LAB |
Performer RPM Pontiac 326-455 Intake Manifold, Black Plasma Finish |
| Description_TRA |
Recommended intake gasket: Edelbrock #7280 |
| Description_TRA |
No provisions for OEM choke |
| Description_TRA |
OEM carb requires conversion to electric/manual choke |
| Description_TRA |
Carb recommendations: Edelbrock Thunder Series AVS, AVS2 or Performer Series 650-800 cfm. |
| Description_TRA |
For 1968-71 use Edelbrock #8015 throttle bracket |
| Description_TRA |
Manifold height: 1-1/4" taller than stock, A-6.88", B-8.00" measured to engine block |
| Description_TRA |
Carb pad height: 7.45" |
| Description_TRA |
Port exit dimensions: 1.10" x 2.06" |
| Description_TRA |
Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA |
Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| RGL |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Basic Operating RPM Range |
1500-6500 |
| Flange Type |
4150 |
| EGR Port |
No |
| Series |
Performer RPM |
| Vehicle Model |
Pontiac |
| Finish |
Black Plasma |
| Length |
8.0000 |
| Width |
15.0000 |
| Height |
24.0000 |
| Weight |
22.0000 |
