Edelbrock part #2198 Performer Rover intake manifold is designed for Rover 3500cc V8's (1968 and later). Manifold also fits 1961-63 Buick and Oldsmobile aluminum 215 c.i.d. V8's. Will not work with stock Stromberg carburetors. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
Specifications:
| Description_ABR |
Intake Mnfld |
| Description_ASM |
Buick:Small-Block:215 (3.5L) |
| Description_ASM |
Oldsmobile:Small-Block:215 (3.5L) |
| Description_ASM |
Range Rover:Small-Block:215 (3.5L) |
| Description_DEF |
Engine Intake Manifold |
| Description_INV |
Performer Rover 215 Intake Manifold |
| Description_EXT |
Edelbrock Performer Rover 215 Intake Manifold is designed to fit all Buick and Oldsmobile 215 c.i.d Aluminum V-8 and Rover 3.5L V-8 engines. Accepts 4150-Style Square-Bore Carburetors. |
| Description_LAB |
Performer Rover Intake Manifold for Buick/Olds 215 V-8 Engines |
| Description_MKT |
Edelbrock part #2198 Performer Rover intake manifold is designed for Rover 3500cc V8's (1968 and later). Manifold also fits 1961-63 Buick and Oldsmobile aluminum 215 c.i.d. V8's. Will not work with stock Stromberg carburetors. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. |
| Description_TRA |
Recommended intake gasket: Fel-Pro #MS96002 |
| Description_TRA |
Manifold height: A-5.00", B-5.92" measured to engine block |
| Description_TRA |
Carb pad height: 5.46" |
| Description_TRA |
Carb recommendations: Edelbrock AVS2 or Performer Series 600-800 cfm |
| Description_TRA |
Port exit dimensions: .88" x 1.54" |
| Description_TRA |
Edelbrock throttle Bracket #8036 will fit |
| Description_TRA |
and accepts GM style throttle, kickdown and cruise control cables. |
| Description_TRA |
Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA |
Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| RGL |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Center Maximum Height |
5.460 |
| Vehicle Model |
Buick/Rover |
| Gasket Or Seal Included |
No |
| Front Maximum Height |
5.000 |
| CNC Ported |
No |
| Flange Type |
4150 |
| Grade Type |
Performance |
| Single Or Dual Plane Type |
Dual |
| EGR Port |
No |
| Material |
Aluminum |
| Basic Operating RPM Range |
Idle-5500 |
| Rear Maximum Height |
5.920 |
| Finish |
Satin |
| Series |
Performer |
| Length |
6.0000 |
| Width |
11.0000 |
| Height |
23.0000 |
| Weight |
15.0000 |
