Edelbrock part #2181 Performer 351W intake manifold is designed for street 351 c.i.d. Ford Windsor V8's. Will not fit Boss 351. Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000. For more info call (865) 966-2269 or go to www.lokar.com. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.
Specifications:
| Description_ABR |
Intake Mnfld |
| Description_ASM |
Ford:Small-Block Windsor:351 (5.8L) |
| Description_DEF |
Engine Intake Manifold |
| Description_LAB |
Performer 351-W Intake Manifold for S/B Ford 351 Windsor |
| Description_INV |
Performer 351W Ford Intake Manifold |
| Description_EXT |
Edelbrock Performer 351W Intake Manifold for Small-Block Ford Windsor Engines is Designed for Street 351 c.i.d. Ford Windsor V8s. Will not fit "Boss 351. Accepts 4150-Style Square-Bore Carburetors. Non-EGR |
| Description_MKT |
Edelbrock part #2181 Performer 351W intake manifold is designed for street 351 c.i.d. Ford Windsor V8's. Will not fit Boss 351. Aftermarket 4-bbl carbs are not compatible with Ford Auto Overdrive Transmission (AOD) unless used with Lokar bracket SRK-4000. For more info call (865) 966-2269 or go to www.lokar.com. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. |
| Description_TRA |
Recommended intake gasket: Edelbrock #7220 |
| Description_TRA |
Manifold height: A-3.50", B-4.75" |
| Description_TRA |
Carb pad height: 4.12" |
| Description_TRA |
Carb recommendations: Edelbrock AVS2 or Performer Series 600-650 cfm |
| Description_TRA |
Port exit dimensions: 1.09" x 1.84" |
| Description_TRA |
Choke block-off plate #8981 included |
| Description_TRA |
Van installation use OEM Ford van gasket set |
| Description_TRA |
will fit early 16-bolt head with Ford 16-bolt intake gasket. Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| Material |
Aluminum |
| CNC Ported |
No |
| Single Or Dual Plane Type |
Dual |
| Flange Type |
4150 |
| EGR Port |
No |
| Grade Type |
Performance |
| Basic Operating RPM Range |
Idle-5500 |
| Vehicle Model |
Ford |
| Center Maximum Height |
4.070 |
| Series |
Performer |
| Finish |
Satin |
| Front Maximum Height |
3.400 |
| RGL |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Rear Maximum Height |
4.750 |
| Gasket Or Seal Included |
No |
| Length |
8.0000 |
| Width |
15.0000 |
| Height |
24.0000 |
| Weight |
19.0000 |
