| Description_DEF |
Engine Oil Cooler End Fitting |
| Description_DES |
Mishimoto Oil Line Fitting Kit fits BMW F8X M3/M4/M2C 2015-2020 |
| Description_EXT |
Mishimoto Oil Line Fitting Kit fits BMW F8X M3/M4/M2C 2015-2020 |
| Description_INV |
Mishimoto MMOCF-F80 |
| Description_FAB |
Direct fit for 2015-2020 F8X M2C, M3, and M4 |
| Description_FAB |
Allows for use of -10AN fittings for custom oil cooler setup |
| Description_FAB |
100% CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate |
| Description_FAB |
Includes durable BMW O-rings for leak-free installation |
| Description_FAB |
Available in blue anodized finish |
| Description_FAB |
Mishimoto Lifetime Warranty |
| Description_MKT |
Open up the world of oil cooling possibilities on your street or track F8X BMW with help from the Mishimoto Oil Line Fitting Kit! This kit has 100-percent CNC-machined components, including the 6061 aluminum oil line fittings and the 303 stainless steel tie-down plate. This adapter kit is applicable for BMW F87 M2 Competition, F80 M3, and F82/F83 M4 vehicles, allowing for the use of -10AN fittings to route oil to a custom oil cooler setup. This is an ideal upgrade for drivers seeking additional cooling for track environments or for those who would like additional engine bay space. Included in this kit are two stock BMW O-rings for leak-free installation. Pair this fitting kit with some Mishimoto stainless steel oil lines and one of our stacked-plate oil coolers to create a complete cooling setup for your BMW. As with all our products, the Mishimoto BMW S55 Oil Line Fitting Kit includes our Lifetime Warranty |
| Description_SHO |
Oil Line Fitting Kit |
| SellingPoint13 |
N/A |
| TechSpec Engine Codes |
S55 |
| TechSpec Installation Notes |
N/A |
| Install Difficulty |
2 |
| SellingPoint04 |
BMW O-rings for leak-free installation |
| TechSpec Chassis Codes |
F80--F82--F83--F87 |
| TechSpec Core Thickness (in) |
N/A |
| TechSpec Rows |
N/A |
| SellingPoint01 |
Allows for use of -10AN fittings for custom |
| SellingPoint02 |
100-percent CNC-machined components, including 6061 aluminum fittings and 303 stainless steel tie-down plate |
| SellingPoint14 |
N/A |
| TechSpec Includes |
-10AN Adapter Fittings--BMW O-Rings--Retaining Plate--Retaining Bolt--Mishimoto Lifetime Warranty |
| SellingPoint05 |
Provides additional engine bay space for applications with an oil accumulator or supercharger setup |
| SellingPoint07 |
Mishimoto Lifetime Warranty |
| SellingPoint08 |
N/A |
| SellingPoint11 |
N/A |
| SellingPoint15 |
N/A |
| TechSpec Core Construction |
N/A |
| TechSpec Core Height (in) |
N/A |
| TechSpec Fluid Capacity (qts) |
N/A |
| TechSpec Note |
N/A |
| TechSpec Outlet |
N/A |
| TechSpec Overall Length (in) |
2.44 |
| SellingPoint03 |
Includes durable stock |
| SellingPoint06 |
Included as part of the Mishimoto BMW E46 M3 Oil Cooler Kit |
| SellingPoint09 |
N/A |
| SellingPoint10 |
N/A |
| SellingPoint12 |
N/A |
| TechSpec Applications |
2015-2018 BMW M3 Sedan--2015-2020 BMW M4 Coupe--2015-2020 BMW M4 Convertible--2016 BMW M4 GTS Coupe--2019-2020 BMW M4 CS Coupe--2019-2020 BMW M2 Competition |
| TechSpec Caution |
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. |
| TechSpec Core Length (in) |
N/A |
| TechSpec Inlet |
N/A |
| TechSpec Overall Height (in) |
1.3 |
| TechSpec Overall Width (in) |
1.51 |
| Length |
1.0000 |
| Width |
1.0000 |
| Height |
3.0000 |
| Weight |
1.0000 |
