Description_DEF |
Engine Oil Cooler |
Description_DES |
Universal Oil Cooler Kit |
Description_EXT |
10-Row Universal Oil Cooler Kit |
Description_INV |
Mishimoto MMOC-U |
Description_FAB |
Universal fitment |
Description_FAB |
10-row stacked-plate cooler withstands high fluid pressures, reduces oil temperatures, and exhibits minimal pressure loss |
Description_FAB |
Includes either standard or thermostatic billet anodized aluminum sandwich plate |
Description_FAB |
Includes preassembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak-free connections |
Description_FAB |
Includes 3/4" -16 and M20-1.5 sandwich plate adapters that support fitment for most makes and models |
Description_FAB |
Available in Sleek Silver or Stealth Black |
Description_FAB |
Easily replaceable thermostat allows you to customize your fluid temperature |
Description_FAB |
Additional thermostats available in 160 degreesF, 185 degreesF, and 200 degreesF |
Description_FAB |
Mishimoto Lifetime Warranty |
Description_MKT |
An oil cooler kit is a must for any car with a high performance engine.Even with optimal driving conditions, increased oil temperatures will cause a drop in pressure and will decrease the ability for your engine to be properly lubricated.This could potentially cause engine seizure.Keep your oil cool with the Mishimoto universal oil cooler kit.This oil cooler kit includes all needed adapters for any vehicle application. |
Description_SHO |
Engine Oil Cooler |
SellingPoint03 |
Includes either standard or thermostatic billet anodized aluminum sandwich plate |
SellingPoint09 |
N/A |
TechSpec Caution |
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team. |
SellingPoint06 |
Available in Sleek Silver or Stealth Black |
TechSpec Core Length (in) |
11 |
TechSpec Overall Height (in) |
N/A |
Install Difficulty |
3 |
SellingPoint02 |
10-row stacked-plate cooler withstands high fluid pressures, reduces oil temperatures, and exhibits minimal pressure loss |
SellingPoint05 |
Includes 3/4-in -16 and M20-1.5 sandwich plate adapters that support fitment for most makes and models |
SellingPoint07 |
Lifetime Warranty |
SellingPoint08 |
N/A |
SellingPoint10 |
N/A |
TechSpec Core Construction |
N/A |
TechSpec Core Thickness (in) |
1.97 |
TechSpec Fluid Capacity (qts) |
N/A |
TechSpec Inlet |
N/A |
TechSpec Installation Notes |
Recommended torque specification for all straight fittings and banjo bolts: 15-25 lb-ftDo not exceed the maximum torque rating of 35 ft-lb |
TechSpec Overall Width (in) |
N/A |
OptionLabel |
Silver Cooler, Non-Thermostatic |
SellingPoint01 |
Universal fitment |
SellingPoint11 |
N/A |
SellingPoint12 |
N/A |
SellingPoint14 |
N/A |
SellingPoint15 |
N/A |
TechSpec Applications |
N/A |
TechSpec Core Height (in) |
2.76 |
TechSpec Engine Codes |
N/A |
TechSpec Includes |
10-Row Oil Cooler--4ft Stainless Steel Braided Hose w/ -10AN fittings--One straight fitting and one 90 degree swivel fitting--5ft stainless Steel Braided Hose w/ -10AN fittings--One straight fitting and one 90 degree swivel fitting--M20 Thermostatic Sandwich Plate---10AN Fittings--Dowty Oil Seals--Large O-Ring--1/8-in NPT Allen Key Plugs--Sandwich plate adapters--Mishimoto Lifetime Warranty |
TechSpec Note |
No dashes = M20 x 1.5--M20 x 1.5--2 dashes = 3/4" -16UNF--3/4" -16UNF |
TechSpec Outlet |
N/A |
TechSpec Overall Length (in) |
N/A |
SellingPoint04 |
Includes preassembled stainless steel braided oil lines with -10AN fittings and dowty seals for durable, leak-free connections |
SellingPoint13 |
N/A |
TechSpec Chassis Codes |
N/A |
TechSpec Rows |
10 |
Length |
23.0000 |
Width |
17.0000 |
Height |
6.0000 |
Weight |
10.0000 |