NOS is expanding our line of budget friendly Sniper nitrous products. If you want to add more power to your existing Sniper kit, or build your own nitrous system, these solenoids are a excellent place to start. The Sniper nitrous solenoid, part number 18018NOS, will support up to 250hp. The Sniper fuel solenoid, part number 18087NOS, will support up to 400hp. Although the cost is low, the quality stands up to the strict standards of the NOS product line.
Specifications:
Description_DEF |
Nitrous Oxide Solenoid |
Description_DES |
NOS Sniper Fuel Solenoid |
Description_FAB |
Low Cost |
Description_FAB |
Supports up to 400hp |
Description_FAB |
Stainless Steel Base |
Description_FAB |
Outlet Location- Side |
Description_KEY |
Nitrous; Nitrous Oxide; Sniper; Fuel; Solenoid; Cheater; |
Description_EXT |
Sniper Fuel Solenoid; 400 HP Max; 2.8 Amp Draw; 1/8 in. NPT Inlet; 1/8 in. NPT Outlet; Large Coil; |
Description_INV |
SNIPER FUEL SOLENOID (LARGE COIL) |
Description_MKT |
NOS is expanding our line of budget friendly Sniper nitrous products. If you want to add more power to your existing Sniper kit, or build your own nitrous system, these solenoids are a excellent place to start. The Sniper nitrous solenoid, part number 18018NOS, will support up to 250hp. The Sniper fuel solenoid, part number 18087NOS, will support up to 400hp. Although the cost is low, the quality stands up to the strict standards of the NOS product line. |
Description_SHO |
Fuel/N2OSolenoid |
WARNING CA Proposition 65 |
Yes |
Product Line |
Sniper |
Max Horsepower |
400 |
WARNING CA Proposition 65 Message |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
Inlet |
Side |
Outlet Attachment |
Female Threads |
Inlet Size |
0.125 in. NPT |
Maximum Horsepower |
400 |
Purge Port |
None |
Material |
Stainless Steel |
Orifice Diameter |
5/32 (0.156 in.) |
Outlet Size |
0.125 in. NPT |
Brand |
NOS |
Outlet Thread |
1/8" NPT |
Product Type |
Fuel Solenoid |
Solenoid Top Cover Color |
Black |
Warning |
California Proposition 65 |
Color |
Black |
Amperage Draw |
2.8 |
Plunger Material |
Fluorocarbon Rubber (FKM) |
AMP DRAW |
2.8A |
Emission Code |
4 |
Finish |
Natural |
Fittings Included |
No |
Inlet Attachment |
Female Threads |
Inlet Thread |
1/8" NPT |
Orifice |
5/32" (0.156) |
Outlet |
Side |
Bracket(s) Included |
No |
Length |
3.0000 |
Width |
3.0000 |
Height |
5.0000 |
Weight |
1.0000 |